Gsm Gateway - Auerswald COMpact 5200 Advanced Information

Hide thumbs Also See for COMpact 5200:

Table of Contents

GSM Gateway

A GSM gateway can be connected to an external port on the PBX. This

allows direct access to be configured on the world-wide GSM network

(Global System for Mobile Communications).

Note: GSM gateways take external calls automatically. When this is

done, costs may be charged to the caller, even if nobody takes the call on

the internal destination side.

Note: LCR ist not available for an external port connected to a GSM

Note: If the PBX has no connection to the fixed network, outgoing

external calls can only be initiated via a targeted exchange line access

using the phone numbers (and the corresponding configured access)

entered on the page Routage > VoIP/GSM routing > Numéros de

téléphone d'exception or via a configured preferred exchange line

(Exchange line settings for subscribers or groups).

Proceed as follows for configuration:

Switching GSM at the external connection on and entering the freely

selectable phone number.

Using the Configuration Manager (on the following pages)

Réseaux publics > RNIS > Liasion Point-Multi-Point (PMP)

Réseaux publics > RNIS > Numéro Principal d'abonnement/

Faisceau (NDI) > Configurer

COMpact 5200/5200R/5500R - Firmware V7.4A - Advanced Information V08 06/2019

Compact 5200r Compact 5500r