Parking The Call Internally (Call Parking) - Auerswald COMpact 5200 Advanced Information

Parking the Call Internally (Call Parking)

Parking the Call Internally (Call Parking)
Call parking lets a caller in a waiting position be transferred so that the
desired communication partner can accept the call on another internal
phone.
Requirements:
• Authorisation Parçage d'appels assigned to the subscriber
• Configured base number
During an external call, proceed as follows:
1. Press the Flash key or the Query key.
2. Enter the internal base number. Possible entries:
Internal base number for the parking zone (for exchange line
request type Direct exchange line phone: with preceding **)
3. Dial the number of the park position. Possible entries:
0 to 9
Note: If you hear a busy signal when you dial the park position, this
position is already in use. Pressing the Flash key or the Query key takes
you back where you can redial the internal base number with another park
position.
4. Wait until you hear the ringtone.
5. Hang up the receiver.
6. Notify the desired communication partner of the waiting caller (e.g., by
making an announcement over the loudspeaker).
COMpact 5200/5200R/5500R - Firmware V7.4A - Advanced Information V08 06/2019
- 339 -