Call Distribution - Auerswald COMpact 5200 Advanced Information

Hide thumbs Also See for COMpact 5200:

Table of Contents

Call Distribution

In call distribution, you specify which internal subscribers should be given

the signal for an incoming external call. This means that in call distribution,

you specify, e.g., permanently, which internal phones should ring when

you are called. Call distribution for each phone number is configured

individually on a connection with multiple external numbers (e.g., ISDN

connection).

You can configure both one phone for multiple phone numbers and

multiple phones (group) for one phone number to ring.

Requirements:

Configured external numbers:

Using the Configuration Manager (on the following pages)

Réseaux publics > RNIS

Réseaux publics > VoIP

Configured internal numbers:

Using the Configuration Manager (on the following pages)

Abonnés (Abo) > Numéros de téléphone

Groupes > Numéros de téléphone

Proceed as follows for configuration:

Creating the call distribution.

Using the Configuration Manager (page Réseaux publics >

Acheminement des appels)

Setting the fallback.

COMpact 5200/5200R/5500R - Firmware V7.4A - Advanced Information V08 06/2019

Compact 5200r Compact 5500r