Auerswald COMpact 5200 Advanced Information page 964

Management LCR Tables
Note: During the dial attempt, if the selected provider under
Fournisseur principal is busy, the selected provider under 1st fallback
provider is attempted, etc. If still no connection is established during the
dial with the 2nd fallback provider, a busy signal is issued.
Prix par connexion
Proceed as follows:
• Separately for main provider, 1st and 2nd fallback provider.
Indicates the fee a provider charges for the establishment of a connection,
based on the currency entered in the PBX (page Fonctions > Crédits de
communication).
Prix par minute
Proceed as follows:
• Separately for main provider, 1st and 2nd fallback provider
The PBX uses Prix par minute for internal calculations and display
purposes during calls that are initiated by an LCR subscriber and perhaps
a Call Through user and routed via the corresponding provider.
The Prix par minute refers to the currency entered in the PBX
(Fonctions > Crédits de communication under Coûts).
Cadencement 1re horloge
Proceed as follows:
• Separately for main provider, 1st and 2nd fallback provider
Seconds the provider assigns the first meter pulse after the connection
has been established (after CONNECT).
COMpact 5200/5200R/5500R - Firmware V7.4A - Advanced Information V08 06/2019
- 964 -