Call Allowance Account - Auerswald COMpact 5200 Advanced Information

Hide thumbs Also See for COMpact 5200:

Table of Contents

Call Allowance Account

A call allowance account is a restricted amount of currency units (credit)

that is configured for each phone. As soon as the configured credit is used

up, it is no longer possible to make external calls on the corresponding

phone until the credit has been increased or reset.

If the remaining amount is used up during a call, the subscriber hears a

short attention tone repeatedly. Afterwards, the call is disconnected.

Note: Some phone service providers do not transmit charges. If this

provider type is used (by manual selection) for making calls, a configured

call allowance account will not apply to the call in question. To avoid this,

the provider phone numbers in question should be entered as restricted

numbers and this function should be enabled for every phone.

Note: If the LCR procedure Soft-LCR 4.0 is used, the charges are

calculated based on the length of the call and the tariff table set up

separately. For this purpose, you need to specify a price per minute as

well as the length of the charge pulse per switching time and provider.

Proceed as follows for configuration:

Configuring LCR.

Using the Configuration Manager (page Routage > Soft-LCR 4.0)

Making settings for call allowance accounts.

Using the Configuration Manager (page Fonctions > Crédits de

communication)

Setting a credit.

COMpact 5200/5200R/5500R - Firmware V7.4A - Advanced Information V08 06/2019

Compact 5200r Compact 5500r