Auerswald COMpact 5200 Advanced Information page 553

Line Connection
If the wait for dial tone setting is disabled, the PBX starts dialling after
approximately 4 seconds.
Transmit line access code automatically (0-9, *, #)
The number/character string entered here is automatically added to the
selected phone number as a prefix.
This is needed if the public exchange always requires a specific leading
number/character string that is not part of the phone number.
Reconnaître et attendre automatiquement l'indicatif de ligne (0-9)
A dialling pause of 3 seconds is inserted automatically after the PBX dials
the number/character string entered here.
This is needed if the public exchange requires a pause after the specified
line access code is dialled.
Évaluation du courant de boucle
Requirements:
• The loop current detection function to detect the network provider's
line connection
The PBX checks whether loop current is present on the line on which the
call is to be made.
Note: If loop current is detected, the line is used.
Note: If no loop current is detected, the PBX treats the line as if it is
either not enabled or not present.
COMpact 5200/5200R/5500R - Firmware V7.4A - Advanced Information V08 06/2019
- 553 -