Explanations Of The Ringing Sequence - Auerswald COMpact 5200 Advanced Information

Explanations of the Ringing Sequence

Explanations of the Ringing Sequence
Different ringing sequences can be set, as it does not always make sense
that all phones logged in a group (e. g. in hotline mode) ring at the same
time.
The following ringing sequences are possible:
Tous
•
•
•
•
linéaire
•
•
•
•
Adding
•
•
COMpact 5200/5200R/5500R - Firmware V7.4A - Advanced Information V08 06/2019
All subscribers logged into the group ring
simultaneously (except fixed phones)
Call waiting is applied to all logged-in phones when
they are busy
The call is ended by the network provider (after
approx. 2 minutes)
In the case of call forwarding on no reply, the group
call is forwarded to the destination already after the
configured delay time
All phones logged into a group ring directly one after
the other
Only one phone rings at a time
Busy subscribers are skipped
In the case of call forwarding on no reply, the group
call is forwarded to the destination already after the
configured delay time
All subscribers logged into a group ring one after the
other delayed by the specified time
Busy subscribers are skipped
- 122 -