Transfert D'appel - Auerswald COMpact 5200 Advanced Information

Transfert d'appel

Transfert d'appel
Important: The expert settings for the ISDN connection are
settings that should only be changed if e. g. country or provider-specific
particularities make it absolutely necessary.
Proceed as follows:
• Using the Configuration Manager (page Réseaux publics > RNIS >
Liasion Point-Multi-Point (PMP) > Paramètres expert > Configurer)
Requirements:
• Configured PTMP connection
GENERAL SETTINGS FOR THE CALL FORWARDING
GENERAL SETTINGS FOR CALL FORWARDING
Méthode de transfert d'appel
Call forwardings at the exchange line are configured and performed in
different ways. The exchange line, router or the provider determines which
of the call forwardings listed below can be used.
Installation CF
The call forwarding is controlled in the PTMP exchange line. The
standardized message processings are not supported by all providers.
Registre
Special form of the Keypad call forwarding method in Spain.
Installation CR
The call forwarding is controlled in the PTP connection. Not every provider
supports this method.
COMpact 5200/5200R/5500R - Firmware V7.4A - Advanced Information V08 06/2019
- 581 -