Auerswald COMpact 5200 Advanced Information page 952

Management Configuration
Numéro d'identification
Automatically issued number. Is used for manual switching of a
configuration by a programming sequence.
Note: All previously assigned identification numbers can be viewed
sorted by number, name or type under Synthèses > Plan de répartition
des numéros d'identification.
activer
The selected configuration is switched on.
Note: To switch off a configuration, switch on a different configuration.
Nouveau
Adds a new configuration to the list. The settings made for the existing
configuration are copied. You must then make the individual settings for
the configuration.
Supprimer
Deletes the entries marked in the list.
Copier
Configuration settings are copied from one configuration into other,
selected configurations.
COMpact 5200/5200R/5500R - Firmware V7.4A - Advanced Information V08 06/2019
- 952 -