Initiating Targeted Exchange Line Access - Auerswald COMpact 5200 Advanced Information

Initiating Targeted Exchange Line Access

Initiating Targeted Exchange Line Access
Using targeted exchange line access, you can define which external
exchange line and own external number is transmitted for an external call.
Proceed as follows:
• Using a character string on the internal phone
• Using the menu/function key on a system phone (optional, see the
phone manual)
Requirements:
• External S
0
in the Instructions)
1. Pick up the receiver.
2. Dial ##96.
3. Enter the separate external number to be transmitted. Possible entries:
External numbers
4. Dial *.
5. Enter an external number. Possible entries:
External number (for exchange line request type Internal phone: with
preceding exchange line access number)
Short code number (for exchange line request type Direct exchange
line phone: with preceding **)
The subscriber is called.
COMpact 5200/5200R/5500R - Firmware V7.4A - Advanced Information V08 06/2019
port, external analogue port (optional, see Technical Data
- 298 -