Exchange Line Request - Auerswald COMpact 5200 Advanced Information

Exchange Line Request

Exchange Line Request
The PBX distinguishes three types of exchange line requests:
Poste interne: The user has to dial an external number with preceding
exchange line access number.
Poste directement raccordé à la ligne principale: For an external
number no prefix is required. However, the user has to dial an internal
number with preceding **.
Indicatif automatique (factory setting): Neither for the internal nor for
the external number a prefix is required (exception: ** for targeted VoIP
access). The PBX automatically distinguishes between internal and
external numbers with the adjustment of the dialled phone number and the
internal numbering plan:
• If the phone number is contained in the phone numbering list, the PBX
establishes an internal connection.
• If the phone number is not contained in the phone numbering list, the
PBX establishes an external connection.
Note: The short code number is a part of the internal numbering
plan and is therefore an internal number. However it leads to an external
connection.
Note: In order that the distinction between internal numbers and phone
numbers in the local area network functions, the internal numbering plan
must not contain phone numbers that also occur within the local area
network. To avoid conflicts, phone numbers of the local area network
should always be dialled with local area code.
Note: Also when the entered phone number correspond with the
internal phone numbering plan, the PBX waits up to 4 seconds for whether
COMpact 5200/5200R/5500R - Firmware V7.4A - Advanced Information V08 06/2019
- 48 -