External Outgoing Call - Auerswald COMpact 5200 Advanced Information

Hide thumbs Also See for COMpact 5200:

Table of Contents

External Outgoing Call

An outgoing external call is made as follows:

A user dials an external number.

The PBX checks whether the phone number or the phone number

range is specified in the exception numbers (VoIP/GSM routing) and

switched on for the current configuration.

If the phone number is found, the PBX automatically forwards the dial

attempt to the connections set up there, while taking into account the

dialling operations.

If the phone number is not in the list of exception numbers (VoIP/

GSM routing), or it is not enabled for the currently valid configuration,

the system checks whether a preferred exchange line has been

If no preferred exchange line has been configured, or the preferred

exchange line is a land line connection, the system checks the phone

number, on the basis of the LCR networks (if LCR is configured and

enabled), and then dials it on a land line connection.

Note: The VoIP/GSM routing is performed depending on the

destination number, if the exchange line settings (subscriber, group)

do not prevent this (e.g. exchange line authorisation only for selected

connections, preferred exchange line, call restrictor).

Note: If a call is initiated over a targeted VoIP access point, VoIP/GSM

routing is not carried out.

Note: The special numbers provided by the VoIP provider, for checking

one's account status or dialling, for example, usually do not include a

COMpact 5200/5200R/5500R - Firmware V7.4A - Advanced Information V08 06/2019

Compact 5200r Compact 5500r