Location/Access Data - Auerswald COMpact 5200 Advanced Information

Hide thumbs Also See for COMpact 5200:

Table of Contents

Location/Access Data

Proceed as follows:

Separately for VoIP accounts

Using the Configuration Manager (page Réseaux publics > VoIP >

Comptes > Configurer)

Note: You will receive the settings data from the VoIP provider with

whom you have set up the account.

Select the account to be displayed/configured.

Codes d'accès à la ligne principale (numéro de compte)

This is an internal number. You can select any of the numbers in the

internal supply of phone numbers. This is then used for the specific VoIP

access point.

Note: A number cannot be allocated twice.

Note: Using numbers with few digits (two- or three-digit numbers)

inevitably restricts the possible supply of numbers that require more digits.

For example, if the phone number 12 is assigned, the phone numbers 120

to 129 and 1200 to 1299 are no longer available.

Note: The default exchange line access number on the PBX is 0 in the

factory settings. However, this can be changed. Note that changing the

exchange line access number restricts the phone numbering plan.

COMpact 5200/5200R/5500R - Firmware V7.4A - Advanced Information V08 06/2019

Do you have a question about the COMpact 5200 and is the answer not in the manual?

Compact 5200r Compact 5500r