Multiple Subscriber Numbers - Auerswald COMpact 5200 Advanced Information

Multiple Subscriber Numbers

Multiple Subscriber Numbers
Proceed as follows:
• Separately for external S
• Using the Configuration Manager (page Réseaux publics > RNIS >
Liasion Point-Multi-Point (PMP))
Requirements:
• External S
0
• Connection type PTMP connection on external S
Liasion Point-Multi-Point (PMP)
Select the PTMP connection to be displayed/configured.
Numéro d'abonné multiple (MSN)
The PTMP connection has up to 10 multiple subscriber numbers. The
network provider assigns the phone numbers for the connection. (Select
Nouveau to enter.)
Phone number for CLIP no screening
Requirements:
• Set up phone number
• CLIP no screening switched on for the ISDN connection
Customer-specific phone number (e.g. a service phone number) that is
transferred to the destination by the exchange line without its correctness
being checked.
COMpact 5200/5200R/5500R - Firmware V7.4A - Advanced Information V08 06/2019
ports
0
port (optional, see Technical Data in the Instructions)
- 571 -
port
0