Line Connection - Auerswald COMpact 5200 Advanced Information

Hide thumbs Also See for COMpact 5200:

Table of Contents

Line Connection

Proceed as follows:

Separately for analogue ports

Using the Configuration Manager (page Réseaux publics >

Analogique > Numéros de téléphone > Configurer)

Requirements:

External analogue port (optional, see Technical Data in the

Instructions)

Connexion analogique

Select the analogue connection to be displayed/configured.

Attente de tonalité

Before the PBX dials a phone number it checks whether a dial tone has

been sent from the public exchange. It starts dialling as soon as it detects

a dial tone for 200 milliseconds

This function prevents the PBX dialling the wrong number by starting

dialling too early if the public exchange takes too long to play the external

dial tone it generates.

Note: Disable this setting if the dial tone cannot be sent clearly by the

public exchange and, as a result, cannot be identified by the PBX.

Temps d'attente (3-30 secondes)

The waiting time for a line connection setting specifies the time (in

seconds) after which the PBX stops establishing the connection if it does

not recognise a dial tone, although the wait for dial tone setting is enabled.

COMpact 5200/5200R/5500R - Firmware V7.4A - Advanced Information V08 06/2019

Compact 5200r Compact 5500r