Pick-up and Call Take-over
Pick-up and Call Take-over
Using Pick-up, you can take a call on your own phone that was originally
sent to another internal phone.
If the call has already been taken, the call can be taken using same
procedure if the call take-over has been allowed by the subscriber being
called. This function is useful, for example, in the case of answering
machines.
Proceed as follows for configuration:
•
Switching authorisation for pick-up for the involved internal phones on.
-
Using the Configuration Manager (page Abonnés (Abo) >
Propriétés > Droits)
•
Switching call take-over for the involved internal phones on.
Using the Configuration Manager (page Abonnés (Abo) >
-
Propriétés > Paramètres)
COMpact 5200/5200R/5500R - Firmware V7.4A - Advanced Information V08 06/2019
- 166 -
Need help?
Do you have a question about the COMpact 5200 and is the answer not in the manual?
Questions and answers