Auerswald COMpact 5200 Advanced Information page 764

VoIP Settings
manual assignement
Enter manually (only digits) or take over a MAC adress after reading with
a bar code scanner.
The MAC address of a device can be found as follows:
• Retrieving from a client certificate sended by the phone
• Reading with a bar code scanner enabled and connected to the
computer (e. g. via a USB interface)
• Reading e. g. on the menu oft the phone or on a label
Note: If a MAC address has been entered and assigned to a
subscriber, the corresponding phone can already be provided with
provisioning data during its first boot process.
Fichier d'en-tête
Display of the header file which is assigned to the subscriber.
Using the Configuration Manager (page Abonnés (Abo) >
•
Provisioning d'IP > Gestion des fichiers)
Fichier de provisioning
Display of the provisioning file which is assigned to the subscriber.
• Using the Configuration Manager (page Abonnés (Abo) >
Provisioning d'IP > Gestion des fichiers)
COMpact 5200/5200R/5500R - Firmware V7.4A - Advanced Information V08 06/2019
- 764 -