Initiating Targeted Voip Access - Auerswald COMpact 5200 Advanced Information

Hide thumbs Also See for COMpact 5200:

Table of Contents

Initiating Targeted VoIP Access

An external call can be initiated via a specific VoIP account using targeted

VoIP access point.

The Internet service provider's network can only be accessed via targeted

VoIP access, e.g., when querying the mailbox.

Proceed as follows:

Using a character string on the internal phone

Using the menu/function key on a system phone (optional, see the

phone manual)

1. Pick up the receiver.

2. Enter the account number. Possible entries:

Internal number of the VoIP account (for exchange line request

types Direct exchange line phone and Automatic exchange line

request: with preceding **)

3. Enter an external number. Possible entries:

External number (for exchange line request type Internal phone: with

preceding exchange line access number)

Note: In any case, the external number must be dialled with the

corresponding local area code, even if it is your own local area code. The

special numbers provided by the VoIP provider for checking one's account

status or dialling usually do not include a local area code.

The subscriber is called.

COMpact 5200/5200R/5500R - Firmware V7.4A - Advanced Information V08 06/2019

Compact 5200r Compact 5500r