Settings Additional Numbers VoIP
Settings Additional Numbers VoIP
Proceed as follows:
Using the Configuration Manager (page Réseaux publics > VoIP >
•
Numéros Directs (SDA) en PTP supplémentaires)
Requirements:
•
Configured PTP connection
Numéros Directs (SDA) en PTP supplémentaires
Select the extension number/bundle for that the additional numbers are to
be displayed/configured, provided that more then one PBX base number
was configured.
Phone number for CLIP no screening
Requirements:
•
Set up phone number
•
CLIP no screening switched on for the VoIP connection
•
The exchange line must support CLIP no screening
Customer-specific phone number (e.g. a service phone number) that is
transferred to the destination by the exchange line without its correctness
being checked.
Nom
The name is used for display purposes on the system phone.
COMpact 5200/5200R/5500R - Firmware V7.4A - Advanced Information V08 06/2019
- 682 -