Setting Options - Auerswald COMpact 5200 Advanced Information

Hide thumbs Also See for COMpact 5200:
Table of Contents

Advertisement

Setting Options

Setting Options
The PBX supports sub-system operation on a higher-level PBX, for
example to connect an external office to headquarters.
Requirements:
At least one free internal VoIP channel for the main PBX
At least one free external VoIP channel for the subordinate PBX
Proceed as follows to configure the main PBX:
Creating VoIP subscribers in the main PBX.
Using the Configuration Manager (page Abonnés (Abo) >
-
Numéros de téléphone >
Note: The corresponding subscribers in main and subordinate PBX
must have the same internal phone number.
Module/Port: VoIP
-
-
Type de périphérique: Téléphone VoIP par défaut
Switching internal phone on for each subscriber.
Using the Configuration Manager (page Abonnés (Abo) >
-
Numéros de téléphone > Configurer > Paramètres)
-
Indicatif: Poste interne
Proceed as follows to configure the subordinate PBX:
Creating subscribers in the subordinate PBX.
-
Using the Configuration Manager (page Abonnés (Abo) >
Numéros de téléphone >
COMpact 5200/5200R/5500R - Firmware V7.4A - Advanced Information V08 06/2019
Nouveau)
Nouveau)
- 227 -

Advertisement

Table of Contents
loading

This manual is also suitable for:

Compact 5200rCompact 5500r

Table of Contents