Liasion Point-Multi-Point (Pmp) - Auerswald COMpact 5200 Advanced Information

Liasion Point-Multi-Point (PMP)

Liasion Point-Multi-Point (PMP)
Important: The expert settings for the ISDN connection are
settings that should only be changed if e. g. country or provider-specific
particularities make it absolutely necessary.
Proceed as follows:
• Using the Configuration Manager (page Réseaux publics > RNIS >
Liasion Point-Multi-Point (PMP) > Paramètres expert > Configurer)
Requirements:
• Configured PTMP connection
Paramètres régionaux pour cette ligne
When setting up and relocating the PBX, the country-specific settings are
set automatically.
County settings for this exchange line
Requirements:
• Adopt settings from PBX location (Germany) disabled
Select the country for this exchange line.
Copier les paramètres vers Exécuter
The settings of this port can be copied an transferred for another port.
Informations de coûts
Requirements:
COMpact 5200/5200R/5500R - Firmware V7.4A - Advanced Information V08 06/2019
- 574 -