Number Presentation (Outgoing) - Auerswald COMpact 5200 Advanced Information

Number Presentation (outgoing)

Number Presentation (outgoing)
Proceed as follows:
• Separately for VoIP providers
• Using the Configuration Manager (page Réseaux publics > Voice
over IP (VoIP page) > Fournisseur > Configurer)
Note: You can obtain the data for the settings either directly from the
VoIP provider or from suitable lists in the Internet.
Requirements:
• For entering a URL: configured DNS server
• For using a STUN server: IP operating mode IPv4
Fournisseur
Select the provider to be displayed/configured.
Format du numéro de téléphone composé
Format in which the VoIP provider requires the phone number of the
destination, to enable the VoIP provider to transfer the call.
Country code with leading zeroes
The destination phone number is transmitted from the PBX to the VoIP
provider with the entire country code (e.g. 0044).
Country code with leading + sign
The destination phone number is transmitted from the PBX to the VoIP
provider with the entire country code in mobile telephony format (e.g. +44).
Country code without leading zeroes
COMpact 5200/5200R/5500R - Firmware V7.4A - Advanced Information V08 06/2019
- 642 -