Configuring The Pbx Remotely With (Auerswald) Remote Access Server Via The Internet - Auerswald COMpact 5200 Advanced Information

Hide thumbs Also See for COMpact 5200:

Table of Contents

Configuring the PBX Remotely with (Auerswald) Remote Access Server via the Internet

Configuring the PBX Remotely with (Auerswald)

Remote Access Server via the Internet

Requirements:

PBX with existing connection to the Internet (DSL)

In the PBX configured ARA PIN and remote switching number and

also enabled dealer access over the Internet

Using the Configuration Manager (page Administration >

Configuration à distance)

Computer with existing connection to the Internet (DSL)

DTMF-capable phone or DTMF dialler

Access data for registration at protected Auerswald services

Knowledge of the serial number of the PBX

Knowledge of user name and password for the Configuration Manager

1. Start a browser.

2. In the browser's address field, enter https://remote-

access.auerswald.de.

3. Enter the required data in the User name/Customer number and

Password/PIN input fields, and click Se connecter.

The user interface of the (Auerswald) Remote Access Server opens.

4. Register the PBX if this has not been done yet.

5. Call the remote switching number.

COMpact 5200/5200R/5500R - Firmware V7.4A - Advanced Information V08 06/2019

Compact 5200r Compact 5500r