2Fxo - Auerswald COMpact 5200 Advanced Information

2FXO

2FXO
Proceed as follows:
Using the Configuration Manager (page Matériel > Configuration du
•
port)
Note: If the settings for the module are marked in red, the module is
selected but not inserted.
Note: The numbers under Port correspond to the numbers used on
the board.
Requirements:
• Selected COMpact 2FXO module
Utilisation
Set the use for the external analogue ports.
libre
Port is not used and port is not taken into account for the calculation of the
total number of existing ports/call channels.
externe
Port is used as external port.
Configurer
Opens the page Connexion analogique (see
COMpact 5200/5200R/5500R - Firmware V7.4A - Advanced Information V08 06/2019
Analogue
- 526 -
Connection).