PBX Time
PBX Time
The PBX has an internal clock that returns the PBX time (time and date)
on the connected end devices. If the end device is so equipped, the PBX
time will be displayed on the end device.
Furthermore, the PBX time is required to carry out functions such as
switching configurations as well as wake-ups.
During a power failure or PBX reset, the PBX time is lost. There are
several ways to update it:
•
Manually
•
Take from PC
•
Via the network
•
Using the buffered real-time clock – saves the time for approx. two
hours in the case of a power outage.
•
Via ISDN/external S
Note: The switch to/from daylight savings is done automatically for the
PBX time.
Proceed as follows for configuration:
Using the Configuration Manager (page Administration > Date et
-
heure du système de télécommunication)
COMpact 5200/5200R/5500R - Firmware V7.4A - Advanced Information V08 06/2019
port (optional, see Technical Data in Manual)
0
- 54 -