System messages
System messages
System messages are used to inform administrators and users about
system events such as operating errors. Every event that happens in the
system is logged. E-mails with information about the events can also be
sent out.
The following different types of system event are possible:
•
system information, e.g. automatic memory clean-up and memory
check (Voice Mail/Fax function), switch between configurations, switch
relays on/off, send system e-mails, register in Configuration Manager
•
simple malfunctions, e.g. automatic memory clean-up and memory
check (Voice Mail/Fax function) errors
•
serious malfunctions, e.g. fan fault (only COMpact
5000R/5200R/5500R), alarm temperature exceeded
•
security warnings, e.g. failed logon attempts, entries in the IP blacklist,
Admin password change
Proceed as follows to set up system messages:
•
Configure DNS server.
Using the Configuration Manager (page Administration >
-
Configuration IP
•
Configure outgoing mail server.
-
Using the Configuration Manager (page Administration >
Courrier électronique > Serveur du courrier sortant)
•
If necessary, set up the language file.
-
Using the Configuration Manager (page Administration >
Courrier électronique > Internationalisation)
COMpact 5200/5200R/5500R - Firmware V7.4A - Advanced Information V08 06/2019
- 213 -