Auerswald COMpact 5200 Advanced Information page 141

Configuration Switchover
For situations where your settings are supposed to apply even after
configuration switchovers, you can use the so-called permanent
configuration. If permanent configuration is enabled, the configuration-
dependent settings will be overridden by the permanent configuration
settings.
The following functions can use the permanent configuration:
• Call forwarding of one's own external number (CF for MSNs, DDI
numbers, or additional numbers)
• Readiness of the Voice mail and fax boxes
Proceed as follows for configuration:
• Creating sonfigurations.
- Using the Configuration Manager (page Calendriers >
Configurations)
• Making settings configuration dependent.
- Using the Configuration Manager (on the following pages)
- Réseaux publics > Acheminement des appels
Réseaux publics > Transfert d'appel
-
- Subscriber (scr) > Profils
- Périphériques > Boîtes de messagerie vocale/télécopie >
Profils
Périphériques > Interphones
-
- Périphériques > Relais (actionneurs)
- Routage > Routage VoIP/GSM > Routing is configuration
dependent
COMpact 5200/5200R/5500R - Firmware V7.4A - Advanced Information V08 06/2019
- 141 -