Auerswald COMpact 5200 Advanced Information page 919

Hide thumbs Also See for COMpact 5200:

Table of Contents

Settings Alarm

Annonce d'alarme

Select the announcement to be played to alarm subscribers.

Abonné d'alarme (numéro de téléphone composé) x

Select up to four internal or external phone numbers to be called when the

PBX performs an alarm loop.

Entering the destination number

Use this to enter a phone number manually.

Possible entries:

External number

Short-code dialling number

Internal number of the individual phone

Internal number of the group

Note: The default exchange line access number on the PBX is 0 in the

factory settings. However, this can be changed.

Note: You can set the display text that will be displayed if an alarm call

is made to the internal subscribers, which have been selected as alarm

subscribers, here (page Fonctions > Textes CLIP).

Choix de ligne/Présentation du numéro de téléphone DDI

---: Alarm calls can be made on all external channels.

External connection: alarm call is made on the selected external

connection. The selected phone number is transmitted.

COMpact 5200/5200R/5500R - Firmware V7.4A - Advanced Information V08 06/2019

Need help?

Do you have a question about the COMpact 5200 and is the answer not in the manual?

Compact 5200r Compact 5500r