Auerswald COMpact 5200 Advanced Information page 407

Call Forwarding for External Numbers
Additional
information
Disabling Unconditional Call Forwarding (on an Internal Phone)
## 96 Own number
Own number
Additional
information
Configuring Call Forwarding on Busy (on an Internal Phone)
## 96 Own number
Own number
COMpact 5200/5200R/5500R - Firmware V7.4A - Advanced Information V08 06/2019
The number can be omitted if call forwarding is to be
configured for the number currently sent by the phone.
Authorisation required
The destination number may only be an external
number.
Permanent configuration is enabled.
## 21 #
Own phone number (number without exchange line
access number (unaffected by a direct exchange line
phone))
The number can be omitted if call forwarding is to be
configured for the number currently sent by the phone.
Authorisation required
The destination number may only be an external
number.
Permanent configuration is enabled.
# * 67 * Destination number
Own phone number (number without exchange line
access number (unaffected by a direct exchange line
phone))
- 407 -
#