Installing Tapi Driver (Tsp) - Auerswald COMpact 5200 Advanced Information

Installing TAPI driver (TSP)

Installing TAPI driver (TSP)
The PBX must be connected with a server PC via a TCP/IP network. The
TAPI driver (TSP) that belongs to the PBX must be installed on this server
PC from the Auerswald Mega Disk.
Important: If you want to integrate the LAN-TAPI into an existing
network, please contact the system administrator responsible for this.
Making changes to an existing network may cause considerable functional
disturbances.
Note: You can find the current version of the driver on the Internet (see
Auerswald: Auerswald Service
Requirements:
• A driver file (*.exe) in its current version saved on a data storage
device (PC)
• Server PC that fulfils one of the following minimum requirements:
- Windows 7 (32-/64-Bit)
- Windows Server 2008 und Windows Server 2008 R2
- Windows 8/8.1 (32-/64-Bit)
- Windows 10 (32-/64-Bit)
- Windows Server 2012 und Windows Server 2012 R2
- Windows Server 2016
COMpact 5200/5200R/5500R - Firmware V7.4A - Advanced Information V08 06/2019
Portal, FONtevo:
- 147 -
FONtevo Support).