Auerswald COMpact 5200 Advanced Information page 559

Clip
DTMF and DTMF (MaxComm)
The network provider uses Dual Tone Multi Frequency signalling to send
the CLIP information.
Sous-version de CLIP
The CLIP sub-version specifies when the analogue network provider
sends the CLIP information.
Aucune analyse des informations CLIP
The data sent by the network provider is not forwarded to the internal
subscriber.
Amplification (0 à +25 dB)
CLIP information amplification specifies the number of decibels by which
the PBX increases or reduces all the audio signals when CLIP information
is being received.
COMpact 5200/5200R/5500R - Firmware V7.4A - Advanced Information V08 06/2019
- 559 -