Auerswald COMpact 5200 Advanced Information page 71

Remote Configuration and Alternative Connection Options
Configuring the PBX Remotely via the Internet without (Auerswald)
Remote Access Server
You can also configure the PBX remotely via an internet connection
(DSL). This requires a fixed external IP address. Alternatively, you can use
VPN or DynDNS. The router on the PBX's network must be configured
accordingly.
Using the PBX (Internal) to Configure internal ISDN System Phones
You can configure internal ISDN system phones via an indirect connection
using the PBX. Before you can do this, you must install the ISDN system
phone's COMfortel Set configuration software on the PC you are going to
use.
Configuring internal ISDN System Phones Remotely via a PBX's
External S Port
0
You can remotely configure the ISDN system phone indirectly via an
external ISDN connection using the PBX and a device which is connected
to both the external S port on the PBX and to the PC (for example ISDN
0
PC controller). The PBX must be configured accordingly. Before you can
do this, you must install the ISDN system phone's configuration software
on the PC you are going to use.
0
COMpact 5200/5200R/5500R - Firmware V7.4A - Advanced Information V08 06/2019
- 71 -