Action Urls (Outgoing) - Auerswald COMpact 5200 Advanced Information

Action URLs (Outgoing)

Action URLs (Outgoing)
Proceed as follows:
Using the Configuration Manager (page Périphériques > URL
•
d'action)
Note: You can find further information about the structure of an Action
URL, the switching of relays, the triggering of an alarm etc. in the Internet
(Service > Developer).
Nouveau
Adds a new Action URL. You must then make the settings for this new
Action URL.
Supprimer
Deletes the entries that are marked in the list.
Nom
Freely selectable name to identify the Action URL within the PBX.
URL d'action
Protocol, IP/URL and command must be understood by the receiving
device (example: http://phoneIP/remote_control?action=HANGUP). You
find further information in the device manual.
Configurer
Opens the configuration of the Action URL.
COMpact 5200/5200R/5500R - Firmware V7.4A - Advanced Information V08 06/2019
- 944 -