Feature Codes - Auerswald COMpact 5200 Advanced Information

Feature Codes

Feature Codes
Proceed as follows:
• Separately for analogue ports
• Using the Configuration Manager (page Réseaux publics >
Analogique > Numéros de téléphone > Configurer)
Requirements:
• External analogue port (optional, see Technical Data in the
Instructions)
Connexion analogique
Select the analogue connection to be displayed/configured.
The feature codes specify the character strings the analogue network
provider requires to execute a service feature on the analogue connection.
If a service feature is requested on one of the PBX's ISDN subscribers
(e.g. system phone), the PBX automatically converts it into the character
strings required for the analogue network provider.
For the following functions, feature codes can be entered:
Masquer le numéro de téléphone (CLIR)
Lancer un rappel si occupé (CCBS)
Activer le transf. immédiat (CFU)
Désactiver le transf. immédiat (CFU)
Activer le transf. si occupé (CFB)
Désactiver le transf. si occupé (CFB)
Activer le transf. si non-réponse (CFNR)
COMpact 5200/5200R/5500R - Firmware V7.4A - Advanced Information V08 06/2019
- 560 -