Accepting Door Call And Opening The Door - Auerswald COMpact 5200 Advanced Information

Accepting Door Call and Opening the Door

Accepting Door Call and Opening the Door
The PBX supports the connection and control of various types of door
terminals. In addition to a door bell, ringing at the door can in this way
also be indicated by internal or external phones or groups. Each door bell
button can be assigned an individual target number. You can also carry
out various door functions such as speech connection with the door and
actuation of the door opener from internal phones.
Proceed as follows:
• Using an internal phone
• Using the menu/function key on a system phone (optional, see the
phone manual)
Requirements:
• Configured door terminal
• Configured door call
Configured relay with operating mode Gâche
•
• Authorisation Ouvrir la porte assigned to subscriber or group
1. Pick up the receiver.
Note: During an existing call press the Flash key or the Query key
and dial 2.
You are connected with the door terminal.
2. Press the Flash key or the Query key.
COMpact 5200/5200R/5500R - Firmware V7.4A - Advanced Information V08 06/2019
- 284 -