Mitsubishi MOTORS Space Runner 1999 Workshop Manual Supplement page 44

MZ203827
MB991453
ENGINE <4G6-MPI> -
REMOVAL SERVICE POINTS
AA" A/C COMPRESSOR REMOVAL
Disconnect the A/C compressor connector and remove the
compressor from the compressor bracket with the hose still
attached.
NOTE
Place the removed A/C compressor where it will not be a
hindrance when removing and installing the engine assembly,
and tie it with a cord.
AB" POWER STEERING OIL PUMP REMOVAL
Remove the power steering oil pump and bracket assembly
from the engine with the hose attached.
NOTE
Place the removed power steering oil pump in a place where
it will not be a hindrance when removing and installing the
engine assembly, and tie it with a cord.
AC" ENGINE MOUNT BRACKET REMOVAL
1. Support the engine with a garage jack.
2. Remove the special tool which was attached when the
transmission assembly was removed.
3. Hold the engine assembly with a chain block or similar
tool.
4. Place a garage jack against the engine oil pan with a
piece of wood in between, jack up the engine so that
the weight of the engine is no longer being applied to
the engine mount bracket, and then remove the engine
mount bracket.
AD" ENGINE ASSEMBLY REMOVAL
After checking that all cables, hoses and harness connectors,
etc., are disconnected from the engine, lower the chain block
slowly to remove the engine assembly downward from the
engine compartment.
Engine Assembly
11C-35