15-2
INTAKE AND EXHAUST –
GENERAL INFORMATION
The intake manifold is made of an aluminium alloy,
and the shape provides an increased intake inertia
effect and has a good volumetric efficiency.
SERVICE SPECIFICATIONS
Item
Manifold distortion of the installation surface mm
SPECIAL TOOL
Tool
General Information/Service Specifications/Special Tool/On-vehicle Service
Number
Name
MD998770
Oxygen sensor
wrench
ON-VEHICLE SERVICE
INTAKE MANIFOLD VACUUM CHECK
Refer to GROUP 11 – On-vehicle Service.
The exhaust pipe is divided into three parts; the
front pipe, the center pipe, and the main muffler.
Standard value
0.15 or less
Use
Removal/Installation of oxygen sensor
15100010160
15100030081
Limit
0.20
15100060073
15100180229