Mitsubishi MOTORS Space Runner 1999 Workshop Manual Supplement page 927

Hide thumbs Also See for Space Runner 1999:

Table of Contents

HEADLAMP WASHER SWITCH CHECK

HEADLAMP WASHER RELAY CHECK

1. Connect battery and test lamp to the relay as illustrated.

2. The relay is normal if the lamp lights for approximately

CHECK VALVE CHECK

Apply pressure to the inlet of the check valve to check its

opening pressure.

Opening pressure: 78 kPa

HEADLAMP WASHER MOTOR CHECK

1. With the washer motor installed to the washer tank, fill

2. Connect battery (+) and (–) cables to terminals 2 and

Headlamp Washer

Switch position

Washer switch

0.5 second upon connection of terminal 3) to battery (–).

the washer tank with water.

1 respectively to see that the washer motor runs and water

is injected.

Terminal No.

Show Quick Links

Chapters

Table of Contents