26-6
FRONT AXLE -
Drive Shaft
B.J. BOOT (RESIN BOOT) REPLACEMENT
The following B.J. boot (resin boot) replacement procedures
have been established. Items other than those given below
are the same as before.
Fill the inside of the B.J. boot with the specified amount of
the specified grease.
Specified grease: Repair kit grease
Amount to use:
<2000, 2400-A/T> 125 g
<2400-M/T> 145 g
Caution
The drive shaft joint uses special grease. Do not mix
old and new or different types of grease.