Mitsubishi MOTORS Space Runner 1999 Workshop Manual Supplement page 924

Spring
force
Shaft
serration
Tapered section
Tailgate window glass
ceramic end line
EXTERIOR –
Rear Wiper and Washer
REMOVAL SERVICE POINT
AA
WIPER ARM AND BLADE REMOVAL
Remove the wiper arm from the shaft while the wiper arm
is raised.
Caution
If the wiper arm is forced while it is still lowered, the
tapered section of the wiper arm will be scraped by the
shaft serrations and the diameter of the tapered section
will become too big, so sufficient care should be exercised.
INSTALLATION SERVICE POINT
AA WIPER ARM ASSEMBLY INSTALLATION
Install so that the wiper blade is positioned at the tailgate
window glass ceramic end line when it stops.
INSPECTION
REAR WIPER AND WASHER SWITCH CHECK
Rear Wiper and Washer Switch
<VEHICLES WITHOUT INTERMITTENT WIPER>
Switch position
Wiper Switch
<VEHICLES WITH INTERMITTENT WIPER>
Switch position
Wiper Switch
Terminal No.
3 4
OFF
ON
Terminal No.
3 4
OFF
INT
ON
51-15
51100950026
10
10