Mitsubishi MOTORS Space Runner 1999 Workshop Manual Supplement page 838

DISASSEMBLY AND REASSEMBLY
Disassembly steps
BA 1. Tie rod end
2. Gear box assembly
AA D Total pinion torque adjustment
STEERING –
Power Steering Gear Box
CHECK THE TIE ROD FOR SWING RESISTANCE
1. Give 10 hard swings to the tie rod.
2. Measure the tie rod swing resistance with a spring balance.
Standard value: 6 – 20 N [1.5 – 4.9 Nm]
3. If the measured value exceeds the standard value, replace
gear box assembly.
4. Even if the measured value is below the standard value,
the tie rod which swings smoothly without excessive play
may be used.
TIE ROD END BALL JOINT DUST COVER
CHECK
1. Check the dust cover for cracks or damage by pushing
it with finger.
2. If the dust cover is cracked or damaged, replace the tie
rod end.
NOTE
Check or damage of the dust cover may cause damage
of the ball joint. when it is damaged during service work,
replace the dust cover.
2
1
42 Nm
37A-17
37200410163