22-6
REVERSE MIS-OPERATION PREVENTION FUNCTION CHECK
1. Carry out the following checks.
Checking procedure
1
2
Transmission side
1st position
A
Lever
MANUAL TRANSMISSION –
Check conditions
Locking knob:
Cannot be pulled up
Locking knob:
Can be pulled up
2. If the above operations cannot be carried out, adjust the
View A
1st position
On-vehicle Service
Shift lever:
Move the lever in the select
direction (reverse direc-
direction (reverse direc
tion) until it stops, and then
move it forward.
shift rod by the following procedure.
a. Loosen the shift rod adjustment bolt.
b. Move the transmission-side lever and the shift lever
assembly to 1st position.
c. Tighten the shift rod adjustment bolt.
22100570017
Check contents
(normal condition)
Shifts to 1st
Shifts to reverse