Mitsubishi MOTORS Space Runner 1999 Workshop Manual Supplement page 631

16-32
Socket
Stop
ring
Snap ring
Pinion
gear
Over-
running
clutch
Stop ring
Snap ring
ENGINE ELECTRICAL –
DISASSEMBLY SERVICE POINTS
AA
1. Press stop ring off snap ring with a suitable socket.
Pinion gear
Overrunning clutch
2. Remove snap ring with snap ring pliers and then remove
Snap ring pliers
STARTER MOTOR PARTS CLEANING
1. Do not immerse parts in cleaning solvent. Immersing the
2. Do not immerse drive unit in cleaning solvent. Overrunning
3. The drive unit may be cleaned with a brush moistened
REASSEMBLY SERVICE POINTS
Using a suitable pulling tool, pull overrunning clutch stop ring
over snap ring.
Stop ring
Overrunning
clutch
Starting System
SNAP RING/STOP RING REMOVAL
stop ring and overrunning clutch.
motor assembly will damage insulation. Wipe motor
assembly with a cloth only.
clutch is pre-lubricated at the factory and solvent will wash
lubrication from clutch.
with cleaning solvent and wiped dry with a cloth.
AA STOP RING/SNAP RING INSTALLATION