Mitsubishi MOTORS Space Runner 1999 Workshop Manual Supplement page 812

6
2
5
1
3
ABS <2WD> –
AB
HYDRAULIC UNIT ASSEMBLY REMOVAL
Caution
1. The hydraulic unit assembly is heavy, and so care
should be taken when removing it.
2. The hydraulic unit assembly is not to be disassembled;
its nuts and bolts should absolutely not be loosened.
3. The hydraulic unit assembly must not be dropped
or otherwise subjected to impact shocks.
4. The hydraulic unit assembly must not be turned upside
down or laid on its side.
INSTALLATION SERVICE POINT
AA BRAKE PIPE CONNECTION
Connect the pipes to the hydraulic unit assembly as shown
in the illustration.
1. From the master cylinder (Primary)
4
2. From the master cylinder (Secondary)
3. To the proportioning valve (RH)
4. To the proportioning valve (LH)
5. To the front brake (LH)
6. To the front brake (RH)
Hydraulic Unit
35B-23