Mitsubishi MOTORS Space Runner 1999 Workshop Manual Supplement page 435

13A-76
Item Check items
No.
18 Cranking signal
(Ignition switch (Ignition switch
– ST)
21 Engine coolant
temperature
sensor sensor
22 Crank angle
sensor
25 Barometric
pressure sensor pressure sensor
26 Accelerator
pedal position
switch switch
27 Power steering
fluid pressure
switch switch
GDI –
Requirements
Transmission: Neu- Engine: Stopped
tral tral
Engine: Cranking
Ignition switch: ON Intake air tempera-
ture: –20_C
Intake air tempera-
ture: 0_C
Intake air tempera-
ture: 20_C
Intake air tempera-
ture: 40_C
Intake air tempera-
ture: 80_C
Engine: crank- Compare the engine
ing speed readings on the
Tachometer: tachometer and the
Connected MUT-II.
Engine: Idling
Engine coolant tem-
Accelerator ped- perature: –20_C
al al position position
Engine coolant tem-
switch: ON
perature: 0_C
Engine coolant tem-
perature: 20_C
Engine coolant tem-
perature: 40_C
Engine coolant tem-
perature: 80_C
Ignition switch: ON Altitude: 0 m
Altitude: 600 m
Altitude: 1,200 m
Altitude: 1,800 m
Ignition switch: ON Release the acceler-
(Depress and re- ator pedal.
lease the accelerator lease the accelerator
Depress the acceler-
pedal several times)
ator pedal slightly.
Engine: Idling Steering wheel sta-
tionary
Steering wheel turn-
ing
Troubleshooting
Normal condition
OFF
ON
–20_C
0_C
20_C
40_C
80_C
Accord
1,200 – 1,400 r/min
1,100 – 1,300 r/min
1,000 – 1,200 r/min
900 – 1,100 r/min
500 – 700 r/min*
101 kPa
95 kPa
88 kPa
81 kPa
ON
OFF
OFF
ON
Inspection Reference
procedure page
No.
Procedure 13A-66
No.27 No 27
Code 13A-18
No.21
Code 13A-19
No.22
1
Code 13A-22
No 25 No.25
Procedure 13A-67
No.28
Procedure 13A-71
No.32