Mitsubishi MOTORS Outlander Sport 2018 Owner's Manual

page of 353

/ 353
Contents
Table of Contents
Bookmarks

Table of Contents

Quick Links

Outlander Sport

RVR

(Canada)

2018

OWNER'S MANUAL

Table of Contents

Chapters

Table of Contents

Need help?

Do you have a question about the Outlander Sport 2018 and is the answer not in the manual?

Questions and answers

Summary of Contents for Mitsubishi MOTORS Outlander Sport 2018

Page 1 Outlander Sport & (Canada) 2018 OWNER’S MANUAL...
Page 2 Table of contents Overview Quick index General information Seat and restraint systems Features and controls Driving safety Comfort controls For emergencies Vehicle care and maintenance Customer assistance/ Reporting Safety Defects Specifications Alphabetical index...
Page 3 Instruments and controls Instruments and controls N00100202818 Headlight leveling switch (if so equipped) P.5-148 Combination headlights and dimmer switch P.5-139 Turn signal lever P.5-149 Front fog light switch (if so equipped) P.5-150 FCM ON/OFF switch (if so equipped) Automatic High Beam (AHB) switch (if so equipped) P.5-143 P.5-78 Instrument cluster P.5-95 Sportronic steering wheel paddle shifter...
Page 4 Instruments and controls Smartphone Link Display Audio (if so equipped) Multi-information meter DISPLAY AUDIO (if so equipped) switch P.5-98 Refer to the separate owner’s manual. USB input terminal (if so equipped) P.5-156 Center vents P.7-2 Active stability control (ASC) Key slot (if so equipped) P.5-22 OFF switch P.5-70 Side vents P.7-2 Glove compartment P.5-169...
Page 5 Interior Interior N00100302503 Sun visors P.5-158 Vanity mirror P.5-158 Dome light (rear) (if so equipped) P.5-166 Card holder P.5-158 Assist grips P.5-172 Dome light (front)/Reading lights Coat hook P.5-172 P.5-165 Sunshade switch (if so equipped) P.5-39 Microphone (if so equipped) Refer to the separate owner’s manual.
Page 6 Interior Electric remote-controlled outside mirror switch P.5-44 Lock switch P.5-38 Power door lock switch P.5-30 Supplemental Restraint System (SRS) - curtain airbags P.4-37 Power window switch P.5-36 Seat belts P.4-11 Sunshade illumination dimming control Adjustable seat belt shoulder anchor P.4-17 switch (if so equipped) P.5-167 Inside rearview mirror P.5-42 ®...
Page 7 Luggage compartment Luggage compartment N00100501595 Spare tire P.8-6 Luggage hooks P.5-173 Luggage hooks P.5-173 Hook Luggage hooks P.5-173 Tools P.8-5 Jack P. 8-5 Overview...
Page 8 Outside Outside N00100602779 Sensor (if so equipped) [for Forward Collision Mitigation system (FCM), Side turn signal lights Lane Departure Warning (LDW) and Automatic High Beam (AHB)] P.5-149, 9-30, 9-35 P.5-78, P.5-86, P.5-143 Power window P.5-36 Rain sensor (if so equipped) P.5-150 Outside rearview mirrors P.5-44 Side turn signal lights (if so equipped) P.5-149, 9-30, 9-35...
Page 9 Outside Antenna Liftgate P.5-32 High-mounted stop light P.9-30, 9-39 F.A.S.T.-key (Free-hand Advanced Security Transmitter) (if so equipped) P.5-11 Keyless entry system P.5-7, 5-25 Rear spoiler Locking and unlocking P.5-28 Rear window wiper P.5-154 Rear-view camera (if so equipped) P.5-93 Tire pressure monitoring system P.5-89 Changing tires P.8-6 Size of tires and wheels P.9-14, 11-5 Tire inflation pressure P.9-18...
Page 10 Warning lights Do this Ref. Page  Park your vehicle in a safe place and stop the engine. Contact your Mitsubishi Motors dealer or a repair facility of your choice for assis- P. 5-137 tance. Charging system warning light  If this light comes on while driving, check to see that the parking brake is fully released.
Page 11  If the light does not go out after the test, or if it comes on again, we recommend that Anti-lock braking system warning you have the system checked at an authorized Mitsubishi Motors dealer or a repair light facility of your choice as soon as possible.
Page 12 If this problem occurs... If this problem occurs... N00200902021 Problem Do this Ref. Page Cannot turn the key. (except for vehicles equipped with the F.A.S.T.-key) Will not turn from “ACC” to “OFF”. Vehicles with continuously variable transmission (CVT): P. 5-47 Check the position of the selector lever.
Page 13 If this problem occurs... Problem Do this Ref. Page Cannot shift the selector lever from the “P” (PARK) position. Shift the selector lever while pressing the brake pedal. P. 5-51 (for vehicles with continuously Check that the ignition switch or the operation mode is in ON. variable transmission (CVT)) The windows are fogged up.
Page 14 If this problem occurs... Problem Do this Ref. Page The engine coolant temperature display “ ” in the multi-infor- mation display is flashing. Steam comes out of the engine compartment. Type 1 The engine is overheated. P. 8-4 Carefully stop the vehicle in a safe place. Type 2 1.
Page 15 If the warning lights on the multi-information display will not turn off, or if they is slow when the vehicle starts come on frequently, please have the vehicle checked at your nearest Mitsubishi Motors dealer. moving. (for vehicles with CVT) A tire is punctured.
Page 16: Table Of Contents
General information Fuel selection ...................3-2 Filling the fuel tank ................3-3 Modifications to and racing of your vehicle ........3-5 Genuine Mitsubishi Motors parts ............3-6 California Perchlorate Materials Requirements .......3-6...
Page 17: Fuel Selection
Mitsubishi Motors Corporation strongly sup- names. Oxygenates are required in some ports the use of reformulated gasoline. Prop- CAUTION areas of the country.
Page 18: Filling The Fuel Tank
Always Your vehicle may have been designed to sat- Mitsubishi Motors dealer or a repair facility handle fuel in well-ventilated outdoor isfy California’s low-emission regulations of your choice.
Page 19 Filling the fuel tank 3. Open the fuel tank filler pipe by slowly WARNING WARNING turning the fuel tank filler cap counter-  Keep the doors and windows closed while  Since the fuel system may be under pres- clockwise. refueling the vehicle.
Page 20: Modifications To And Racing Of Your Vehicle
In addition, malfunctions caused by connect- Always tighten the fuel tank filler cap until ing a device other than the Scan Tool may  Failure to use Mitsubishi Motors genuine you hear at least 3 clicks. not be covered under warranty.
Page 21: Genuine Mitsubishi Motors Parts
Also avail- installation of non-Mitsubishi Motors genu- the vehicle without an external antenna able from your Mitsubishi Motors dealer are ine parts affects the driving safety of your may cause electrical system interference, a wide variety of accessories to personalize Mitsubishi-vehicle.
Page 22 Seat and restraint systems Seats ....................4-2 Seats and restraint systems ..............4-2 Front seats ..................4-3 Rear seats ..................4-7 Head restraints .................4-7 Extending a luggage compartment ..........4-9 Seat belts ..................4-11 Seat belt use during pregnancy ............4-17 Seat belt pre-tensioner and force limiter systems ......4-17 Child restraint systems ..............4-19 Maintenance and inspection of seat belts ........4-26 Supplemental Restraint System (SRS) - airbag ......4-26...
Page 23: Seats
Seats Seats N00408401623 locks also are safety equipment, which must 1 - Front seat Seats and restraint systems be used correctly. N00401601264  To adjust the seat forward or backward  Always check the following before you drive: Your vehicle has seat belts and other features Page 4-3 that help protect you and your passengers in ...
Page 24: Front Seats
Front seats Safety equipment cannot prevent injury or WARNING CAUTION death in all motor vehicle accidents. You can  Do not attempt to adjust the seat while  When sliding the seats, be careful not to help reduce the risk of injury or death, how- driving.
Page 25 Front seats WARNING To adjust the seatbacks Power seat adjustment  To make sure that the seat is securely N00402001425 locked, try to move it forward or back- Operate the switch in the direction of the ward without using the adjusting lever. Manual seat adjustment arrows to adjust the seatback.
Page 26 Front seats WARNING  To reduce the risk of serious injury or death in the event of an accident or sud- den stop, all seatbacks should be kept in the upright position while the vehicle is in motion. Seat belt performance during an accident can be adversely affected if the seatbacks are reclined.
Page 27 Front seats Heated seat WARNING (if so equipped)  Persons who are unable to feel tempera- N00435601489 ture change or skin pain due to age, ill- The heated seats can be operated by pushing ness, injury, medication, alcohol use, the switch when the ignition switch or the fatigue or other physical conditions or operation mode is in ON.
Page 28: Rear Seats
Rear seats CAUTION Rear seats Head restraints  If water or any other liquid is spilled on the N00402500191 N00404300542 seat, allow it to dry thoroughly before Padded head restraints for the seats can attempting to use the heater. Turn the heater Arm rest (if so equipped) reduce the risk of a whiplash injury if your...
Page 29 Head restraints  To raise the restraint, pull it straight up. WARNING  To lower the restraint, push down on it  Driving without the head restraints in while pressing the lock knob (A) in the place can cause you and your passengers direction shown by the arrow.
Page 30: Extending A Luggage Compartment
Extending a luggage compartment CAUTION WARNING  Check that the lock knob (A) is extended out  The luggage compartment in the rear of as shown in the illustration. Then pull the the vehicle should never be used as a play head restraint up to make sure that it is area by children.
Page 31 Extending a luggage compartment CAUTION To fold the seatbacks To return the seatbacks  When adjusting the seats, be careful not to 1. If the outboard seat belt has been sepa- catch your hand or leg. Personal injury could CAUTION rated from the seat belt guide (B), insert it result.
Page 32: Seat Belts
Seat belts 5. After making sure that the seat belt is not Seat belts twisted, insert the small latch plate (E) into the detachable anchor (F) aligning the N00406001537 Seat belts are installed in your vehicle to help marks (G) on the plate and buckle until a reduce the risk of injury to the driver and pas- “click”...
Page 33 Mitsubishi Motors far back as possible. Refer to “Supplemen- dealer to determine whether replacement tal Restraint System (SRS) - airbag” on is necessary.
Page 34 Seat belts 1. Occupants should always sit back in their 4. Pull the seat belt out slowly while holding WARNING seats with their backs against the upright the latch plate. Push the latch plate into  To reduce the risk of serious injury or seatback.
Page 35 Seat belts luggage compartment while the driver’s side WARNING rear seat back is folded down.  Be sure the seat belt webbing is not twisted when worn. Twisted webbing may WARNING adversely affect seat belt performance.  Never detach the rear center seat belt 6.
Page 36 Seat belts 3. After the seat belt is retracted completely, NOTE To detach insert the latch plate (E) into the upper slit  If the seat belt locks up and cannot be pulled (H) and the small latch plate (B) into the 1.
Page 37 Seat belts If you then drive with the seat belt unfastened Driver’s seat belt Front passenger seat belt warn- for longer than a minute from when the igni- reminder/warning light and ing light tion switch or the engine switch is operated, display the warning light will come on and blink N00418301289...
Page 38: Seat Belt Use During Pregnancy
Seat belt use during pregnancy Adjustable seat belt shoulder WARNING Seat belt use during preg- anchor (front seats)  Make sure the anchor is securely locked in nancy position after adjusting it. N00406300344 N00406800134 To move the anchor (A), press the lock knob Seat belts work for everyone, including preg- Seat belt extender (B) and slide the anchor to the desired posi-...
Page 39 The ignition switch is in the “ON” or The seat belt pre-tensioner system includes belt pre-tensioner system inspected by an “START” position. authorized Mitsubishi Motors dealer. the following components: [Vehicles equipped with the F.A.S.T.-key] The operation mode is in ON.
Page 40: Child Restraint Systems
Child restraint systems The child restraint system should be appropri-  Children who weigh more than 40 pounds SRS warning ate for your child’s weight and height, and (18 kg) or who are more than 40 inches N00408700081 should properly fit your vehicle’s seat. (100 cm) tall, regardless of age, should This warning light tells you if there is a prob- For detailed information, refer to the instruc-...
Page 41 Child restraint systems WARNING WARNING WARNING  Never hold an infant or child in your arms  Your vehicle is also equipped with a front  FRONT-FACING CHILD RESTRAINT or on your lap when riding in this vehicle, passenger airbag. SYSTEMS should be used in the rear seat even when you are wearing your seat belt.
Page 42 Child restraint systems WARNING NOTE Installing a child restraint sys- tem using the LATCH (Lower  When installing a child restraint system,  Before purchasing a child restraint system, follow the instructions provided by the try installing it in the rear seat to make sure Anchors and Tethers for chil- manufacturer and follow the directions in there is a good fit.
Page 43 Child restraint systems Tether anchor locations Examples of child restraint sys- tems compatible with the LATCH N00418901214 Your vehicle has 3 attachment points on the system backside of the rear seats. These are for N00419001209 securing a child restraint system tether strap to each of the 3 rear seating positions in your vehicle.
Page 44 Child restraint systems 5. Latch the tether strap hook (E) of the child NOTE Installing a child restraint sys- restraint system to the tether anchor bar tem using the seat belt (with  In order to secure a child restraint system (F) and tighten the tether strap so it is compatible with the LATCH system, use the emergency/automatic locking...
Page 45 Child restraint systems 2. Route the seat belt through the child WARNING restraint system’s according to the instruc-  When you install a child restraint system tions provided by the child restraint sys- using the seat belt, always make sure the tem’s manufacturer.
Page 46 Child restraint systems their stomach, a commercially available WARNING booster seat must be used to raise the child so  Child restraint system tether anchors are that the shoulder belt crosses their shoulder designed only to withstand loads from cor- and the lap belt remains positioned low rectly fitted child restraint systems.
Page 47: Maintenance And Inspection Of Seat Belts
Mitsubishi Motors dealer. Failure to have ing those occupants with protection against an authorized Mitsubishi Motors dealer The SRS airbags are NOT a substitute for use head and chest injuries in certain moderate to perform the work could reduce the effec- of the seat belts.
Page 48 Supplemental Restraint System (SRS) - airbag systems” on page 4-19. WARNING WARNING  Airbags inflate very quickly and with • A driver or front passenger sitting too WARNING close to the steering wheel or instrument great force. Do not sit on the edge of the ...
Page 49 Supplemental Restraint System (SRS) - airbag Airbag WARNING WARNING WARNING  NEVER put REAR-FACING CHILD  FRONT-FACING CHILD RESTRAINT  Older children should be seated in the RESTRAINT SYSTEMS or INFANT SYSTEMS should be used in the rear seat rear seat with their seat belt properly RESTRAINT SYSTEMS in the front pas- whenever possible.
Page 50 Supplemental Restraint System (SRS) - airbag When the impact sensors detect a sufficient How the Supplemental front or side impact to deploy the airbag(s), Restraint System works the appropriate airbag(s) will be deployed. N00407800450 When the airbag control unit detects rollover The SRS includes the following components: of the vehicle, curtain airbags will be...
Page 51 SRS sensors inspected by access to the vehicle or the EDR. an authorized Mitsubishi Motors dealer as and, soon as possible.  How fast the vehicle was traveling.
Page 52 SRS sensors inspected by you should have your vehicle inspected by • Do not place anything between the seat an authorized Mitsubishi Motors dealer as an authorized Mitsubishi Motors dealer as and the floor console. soon as possible.
Page 53  If any of the following conditions occur, you should have the airbag system in your vehicle inspected authorized Mitsubishi Motors dealer as soon as possi- ble: • The passenger’s airbag off indicator Warning display type 2 comes on when an adult is sitting on the front passenger seat.
Page 54 Supplemental Restraint System (SRS) - airbag ger’s airbag does not deploy when the front WARNING passenger seat is not occupied or when the  If any of the following conditions occur, weight sensor in the front passenger seat there may be a problem with the SRS air- senses a weight on the seat of less than bags and/or seat belt pre-tensioners, and approximately 66 pounds (30 kg).
Page 55 Supplemental Restraint System (SRS) - airbag Deployment of front airbags N00408000592 The front airbags and driver’s knee airbag ARE DESIGNED TO DEPLOY when … Head-on collision with a solid wall at speeds of approx. Moderate to severe frontal impact within the shaded 15 mph (25 km/h) or higher area between the arrows The front airbags and driver’s knee airbag are...
Page 56 Supplemental Restraint System (SRS) - airbag they cannot provide protection to the occu- The front airbags and driver’s Collision with a utility pole, tree or other nar- pants. knee airbag MAY NOT DEPLOY row object Typical situations are shown in the illustra- when …...
Page 57 Supplemental Restraint System (SRS) - airbag The front airbags and driver’s Collision with an elevated median/island or curb knee airbag MAY DEPLOY when … The front airbags and driver’s knee airbag may deploy if the underside of the vehicle suffers a moderate to severe impact (under- Vehicle travels over a deep hole/pothole carriage impact).
Page 58  The airbag system is designed to work only once. After the airbags deploy, they will not work again. They must promptly be replaced and the entire airbag system must be inspected by an authorized Mitsubishi Motors dealer. Seat and restraint systems 4-37...
Page 59 Supplemental Restraint System (SRS) - airbag WARNING WARNING WARNING  Side airbags and curtain airbags can  Do not place any objects around the area  Do not put a hanger or any heavy or cause serious injury or death to anyone where the side airbags deploy.
Page 60 The typical situation is shown in the illustra- if the deformation of the body seems to be Mitsubishi Motors dealer. There is a risk tion. large, because the vehicle’s body structure is of a serious injury or death. Improper...
Page 61 Supplemental Restraint System (SRS) - airbag Side impact in an area away from the passenger Head-on collision Oblique side impact compartment Rear end collision to your vehicle Motorcycle or other similar small vehicle Vehicle rolls onto its side or roof (Side airbag collision with the side of vehicle only) Pitch end over end...
Page 62 [For vehicles sold in Puerto Rico] Mitsubishi Motors dealer so that the SRS can adversely affect SRS performance and To contact Mitsubishi Motor Sales of be made safe for disposal.
Page 63 Supplemental Restraint System (SRS) - airbag [For vehicles sold in Guam] Warning label To contact Triple J Enterprises Inc. N00408600354 call (671) 649-3673 or write to: Occupant restraint warning labels for the SRS Triple J Enterprises, Inc. are located in the vehicle as shown in the P.O.
Page 64 Features and controls Break-in recommendations ..............5-3 Brake assist system ................5-67 Keys ....................5-3 Anti-lock braking system ..............5-67 Electronic immobilizer (Anti-theft starting system) ......5-4 Electric power steering system (EPS) ...........5-69 Keyless entry system (if so equipped) ..........5-7 Active stability control (ASC) ............5-70 Free-hand Advanced Security Transmitter (F.A.S.T.-key) Cruise control (if so equipped) ............5-73 Forward Collision Mitigation system (FCM) (if so equipped) ..5-78...
Page 65 Features and controls ® HomeLink Wireless Control System (if so equipped) ....5-159 Interior lights ................5-165 Storage spaces ................5-168 Cup holders ................. 5-170 Bottle holder ................5-171 Cargo area cover (if so equipped) ..........5-171 Assist grips .................. 5-172 Coat hook ..................
Page 66: Break-In Recommendations
Break-in recommendations Break-in recommendations Keys N00508700330 N00508801660 Advanced automobile manufacturing tech- Type 1 niques permit you to operate your new vehi- cle without requiring a long break-in period of low-speed driving. Two keys are provided. The keys fit all locks. However, you can add to the future perfor- Keep one in a safe place as a spare key.
Page 67: Electronic Immobilizer (Anti-Theft Starting System)
 If you lose your key, to prevent the theft of the vehicle immediately contact an autho- NOTE N00509101918 rized Mitsubishi Motors dealer. CAUTION  In the following cases, the vehicle may not If you notify an authorized Mitsubishi be able to recognize the registered ID code Motors dealer of the key number, they can ...
Page 68 (except for vehicles sold in Canada), or  A system failure is suspected when the igni- by your authorized Mitsubishi Motors dealer. tion switch is turned to the “START” posi- For you to register the ID code yourself, fol- tion, and the engine does not start.
Page 69 Electronic immobilizer (Anti-theft starting system) your vehicle at your Mitsubishi Motors NOTE General information dealer) by doing the following:  Perform the operation when the interrupt dis- N00562301111 play screen is not showing. The interrupt dis- 1. Insert the first valid key into the ignition...
Page 70: Keyless Entry System (If So Equipped)
Keyless entry system (if so equipped) changed as required. This is done with the NOTE Keyless entry system (if so key removed from the ignition switch.  If you press the LOCK button (1) twice the equipped) horn will sound once. NOTE N00509001988 ...
Page 71 Keyless entry system (if so equipped) 4. Within 10 seconds of pressing the 3. Press and hold the LOCK button (1) for 4 Number of To lock To unlock UNLOCK button in step 3, release the to 10 seconds and then press and hold the chimes UNLOCK button first, and then release UNLOCK button (2) during this time.
Page 72 Registering the ID code can be done by your- UNLOCK button (2) for 4 to 10 seconds. self or by your authorized Mitsubishi Motors Then press and hold the LOCK button (1) NOTE dealer. For you to register the ID code your- during this time.
Page 73  If you wish to obtain an additional remote control transmitter, please contact an autho- CAUTION rized Mitsubishi Motors dealer. A maximum  Changes or modifications not expressly 3. With the Mitsubishi mark facing you, of 8 remote control transmitters can be pro- approved by the manufacturer for compli- grammed for your vehicle.
Page 74: Free-Hand Advanced Security Transmitter (F.a.s.t.-Key) (If So Equipped)
 An authorized Mitsubishi Motors dealer can operation mode. When leaving the vehi- replace the battery for you if you prefer. cle, make sure you are carrying the F.A.S.T.-key and then lock the vehicle.
Page 75 Refer to “To operate without using the details, contact authorized F.A.S.T.-key” on page 5-22. Mitsubishi Motors dealer.  The F.A.S.T.-key is constantly performing • Enabling only the locking and unlocking reception operations in its communication of the doors and the liftgate with the vehicle.
Page 76 Free-hand Advanced Security Transmitter (F.A.S.T.-key) (if so equipped) Operating range of the NOTE NOTE F.A.S.T.-key  When the battery of the F.A.S.T.-key has run  Only the doors and the liftgate that detect the down or there are strong electromagnetic F.A.S.T.-key can be locked and unlocked.
Page 77 Free-hand Advanced Security Transmitter (F.A.S.T.-key) (if so equipped) To operate using the F.A.S.T.- Liftgate switches N00503401355 To lock While carrying the F.A.S.T.-key, press the driver’s or front passenger’s door lock/unlock switch (A), or the liftgate LOCK switch (B) within the operating range to lock all the *: Front of the vehicle doors and the liftgate.
Page 78 Front passenger’s door lock/unlock switch  The time within which locking confirmation is possible can be adjusted. See an autho- rized Mitsubishi Motors dealer for details. To unlock While carrying the F.A.S.T.-key within the operating range, you can unlock the doors and the liftgate by using the F.A.S.T.-key.
Page 79  The time within which locking confirmation is possible can be adjusted. See an autho- Within 30 seconds of locking the doors and rized Mitsubishi Motors dealer for details. liftgate using the LOCK switch, press the Engine switch  In cases such as the following, the F.A.S.T.- LOCK switch twice rapidly to retract the out- key does not operate.
Page 80 Immediately contact authorized Mitsubishi Motors dealer. All electrical accessories can be used. The indicator light on the engine switch illu- minates green. NOTE The indicator light turns off when the engine CAUTION ...
Page 81 If the following warning displays, contact an  A door or the liftgate cannot be locked system and other electric devices that can be authorized Mitsubishi Motors dealer. even when the driver’s or front passen- operated with that mode. ger’s door lock/unlock switch, or the lift- When the engine switch is pressed while the gate LOCK switch is pressed.
Page 82 This setting can be changed. the buzzer sounds for about 3 seconds as a See an authorized Mitsubishi Motors dealer warning, and the doors and the liftgate cannot for details. be locked.
Page 83 Free-hand Advanced Security Transmitter (F.A.S.T.-key) (if so equipped) gate LOCK switch, the warning display is The engine is warmed up enough for driv- To prevent battery drain, wait a few seconds displayed and the buzzer sounds for about 3 ing when the bar graph of engine coolant between attempts to restart the engine.
Page 84 If the engine still will not start, con- tion and it will require greater manual tact your local Mitsubishi Motors dealer 1. Make sure that all electric devices, such effort to operate the steering. This could...
Page 85 Free-hand Advanced Security Transmitter (F.A.S.T.-key) (if so equipped) NOTE If the F.A.S.T.-key is not operat- NOTE ing properly  If you have to bring the engine to an emer-  The F.A.S.T.-key is fixed in the key slot gency stop while driving, press and hold the when inserted in the illustrated direction.
Page 86 Motors dealer by referring to the key number. To prevent vehicle theft, take your vehicle Electronic immobilizer (Anti- and the remaining F.A.S.T.-keys to an autho- rized Mitsubishi Motors dealer to have the ID theft starting system) codes reprogrammed. NOTE N00529601153 The electronic immobilizer is designed to sig- ...
Page 87 If you choose to have your authorized 2. While carrying the first valid F.A.S.T.- 7. Within 10 seconds of pressing the LOCK Mitsubishi Motors dealer register the ID key, put the operation mode in ON. (Per- button in step 6, release the LOCK button...
Page 88 Free-hand Advanced Security Transmitter (F.A.S.T.-key) (if so equipped) To unlock all doors and the liftgate, press the 3- PANIC button NOTE UNLOCK button two times within a 2 second 4- Operation indicator light  The immobilizer display will go off immedi- time period.
Page 89 Free-hand Advanced Security Transmitter (F.A.S.T.-key) (if so equipped) 3. Press and hold the UNLOCK button (2) The horn will not sound. Setting the door and liftgate for 4 to 10 seconds and then press and chime: unlock function hold the LOCK button (1) during this The horn will sound.
Page 90 1. Press the PANIC button (3) for more than  If you lose your F.A.S.T.-key, please contact  Changes or modifications not expressly 1 second. an authorized Mitsubishi Motors dealer for a approved by the manufacturer for compli- replacement. 2. The headlights will blink on and off and ance could void the user’s authority to oper-...
Page 91: Door Locks
 Never leave a child alone in the vehicle. In  An authorized Mitsubishi Motors dealer can addition to the risk of heat stroke, chil- replace the battery for you if you prefer.
Page 92 Door locks 2. Be sure the keys are not inside the vehi- To lock or unlock the door from cle. Close the door. the inside Move the lock knob to the lock position to lock the door. All doors should be kept locked while driv- ing.
Page 93: Power Door Locks
Power door locks If the ignition switch is turned off and the ON buzzer will sound intermittently to To lock and unlock the doors driver’s door is opened with the key in the remind you to put the operation mode in OFF. and liftgate ignition switch, the key reminder buzzer will The warning display will be displayed on the...
Page 94: Child Safety Locks For Rear Door
To acti- side door handle. vate or deactivate these functions, please When the lever is in the release position (2), contact your authorized Mitsubishi Motors the child safety lock is released and the rear dealer. Child safety locks for rear...
Page 95: Liftgate
Liftgate WARNING To open Liftgate  When the vehicle is parked on a slope, the N00510101338 After unlocking, press the liftgate OPEN effort required to open or close the liftgate WARNING switch (A) and raise the liftgate. may be greater or less than expected. The liftgate may also open or close more ...
Page 96: Inside Liftgate Release
Inside liftgate release NOTE NOTE  On vehicles equipped with the mirror retrac-  Gas struts (B) are installed in the locations tor switch, the outside rearview mirrors will illustrated in order to support the liftgate. automatically extend when the liftgate and all doors are unlocked using the liftgate OPEN switch (A).
Page 97: Theft-Alarm System
Theft-alarm system At this time, the theft-alarm indicator (A) CAUTION on the audio panel flashes for confirma-  Do not modify or add parts to the theft-alarm tion. system. Doing so could cause the theft-alarm to malfunction. Armed stage Park the vehicle and stop the engine. Arm the system as described below.
Page 98 Theft-alarm system NOTE Type of alarm NOTE  The system will be disarmed if, while the  While the alarm is operating, a warning is theft-alarm indicator is illuminated, the fol- displayed on the information screen in the When the alarm is activated: lowing operation is performed.
Page 99: Power Window Control
Power window control Disarmed stage NOTE Power window control  The amount of time after unlocking until the N00510800370 vehicle relocks automatically The system will be disarmed if the following adjusted. See an authorized Mitsubishi operation is performed. Motors dealer for details. ...
Page 100 Power window control WARNING Sub switch  Never leave the vehicle without carrying N00548800098 the key.  Never leave children or unreliable adults unattended inside the vehicle. Main switch N00548700097 The main switch located on the driver’s door can be used to operate all the windows. 1- Driver’s door window switch A window can be opened or closed by operat- 2- Front passenger door window switch...
Page 101 Power window control stopped. However, once the driver’s door or WARNING CAUTION the front passenger’s door is opened, the  Before driving with a child in the vehicle,  The safety mechanism is deactivated while power windows cannot be operated. be sure to lock the window switch to make the switch is pulled up.
Page 102: Sunshade (If So Equipped)
If nothing is trapped, have the sunshade checked at an Press the switch (1), the sunshade opens. authorized Mitsubishi Motors dealer. Press and hold the switch (1), the sunshade automatically opens. Release the switch once the sunshade starts moving automatically.
Page 103: Parking Brake
Parking brake To stop the moving sunshade, press the CAUTION To apply switch (1), (2) or (3).  Do not deliberately trap your hands or head in order to activate the safety mechanism. To close Personal injury and malfunction of the sun- shade could result.
Page 104: Steering Wheel Height And Reach Adjustment
Steering wheel height and reach adjustment To deactivate CAUTION Steering wheel height and  Before driving, be sure that the parking reach adjustment brake is fully released and brake warning N00511500228 light is off. To adjust the steering wheel to the desired If you drive without the parking brake fully released, the warning display will appear on position, move the lever upward or down-...
Page 105: Inside Rearview Mirror
Inside rearview mirror WARNING Type 1  When releasing the lever (moving it to the position (B)), be sure to hold the steering wheel firmly. Otherwise, the steering wheel may slip down too suddenly. Inside rearview mirror Type 2 N00511601369 Adjust the inside rearview mirror only after making any seat adjustments so as to have a clear view to the rear of the vehicle.
Page 106 Inside rearview mirror To reduce the glare Type 3 When the headlights of the vehicles behind you are very bright, the reflection factor of Type 1 the rearview mirror is automatically changed to reduce the glare. The day/night knob (A) at the bottom of the mirror can be used to adjust the mirror to reduce the glare from the headlights of vehi- cles behind you during night driving.
Page 107: Outside Rearview Mirrors
Outside rearview mirrors NOTE WARNING To adjust the mirror position  If you want to stop automatic mode, press  Your passenger’s side mirror is convex. N00549101170 The outside rearview mirrors can be adjusted the switch (3) and the indicator will go off. The objects you see in the mirror will look To return to automatic mode, press the smaller and farther away than they...
Page 108 Outside rearview mirrors NOTE For vehicles equipped with the mirror CAUTION retractor switch  After adjusting, return the lever to the “•”  It is possible to retract and extend the mirrors (OFF) position (C). by hand. After retracting a mirror using the mirror retractor switch, however, you should Retracting and extending the mir- extend it by using the switch again, not by...
Page 109: Ignition Switch
Ignition switch For information on operations for vehicles Retracting and extending the mir- Door mirror heater equipped with the Free-hand Advanced Secu- rors without using the mirror N00549300191 rity Transmitter (F.A.S.T.-key), refer to retractor switch (automatic exten- When the rear window defogger switch is “Free-hand Advanced Security Transmitter sion function) pressed with the engine running, the outside...
Page 110: Starting The Engine
To start the engine, the ID code charged. authorized Mitsubishi Motors dealer. which the transponder inside the key sends  Do not turn the key to the “START” position must match the one registered to the immobi- when the engine is running, doing so could lizer computer.
Page 111 Starting the engine For information on operation for vehicles  A longer warm up period will only con- There is usually no need to depress the accel- equipped with the Free-hand Advanced Secu- sume extra fuel. The engine is warmed up erator pedal when starting the engine.
Page 112: Manual Transaxle (If So Equipped)
Press the clutch pedal all the way the engine still will not start, contact your down while shifting gears. local Mitsubishi Motors dealer or a repair After several attempts, you may experience facility of your choice for assistance.
Page 113 Manual transaxle (if so equipped) NOTE NOTE Upshifting  During cold weather, shifting may be diffi-  To shift into reverse from 5th gear, move the N00512901154 cult until the transaxle lubricant has warmed gearshift lever to the “N” (Neutral) position, For the best fuel economy and performance in up.
Page 114: Continuously Variable Transmission (Cvt) (If So Equipped)
Continuously variable transmission (CVT) (if so equipped) If your vehicle is equipped with the spor- Downshifting Maximum possible driving speed tronic steering wheel paddle shifter, you can N00513000096 manually shift the transmission up and down. It is recommended that you downshift to a Shift Maximum possible driving Refer to “Sports mode”...
Page 115 Continuously variable transmission (CVT) (if so equipped) 2. Move the selector lever to the desired WARNING Except for vehicles equipped with sportronic position. steering wheel paddle shifter  Always press the brake pedal when shift- ing the selector lever into a selector posi- NOTE tion from the “N”...
Page 116 4. Depress the brake pedal with the right Immediately have your vehicle checked by an foot. authorized Mitsubishi Motors dealer or a 5. Insert a screwdriver in the shift-lock repair facility of your choice. release hole (B). Shift the selector lever to If you need to move the vehicle, shift the the “N”...
Page 117 Continuously variable transmission (CVT) (if so equipped) If the ambient temperature is low, the selector NOTE CAUTION lever position display on the multi-informa-  While the selector lever position display is  If a malfunction occurs in the CVT while tion display may blink when the selector blinking, a buzzer will sound intermittently.
Page 118 Mitsubishi Motors dealer or a repair facility the vehicle is not moving for an extended CAUTION of your choice. length of time during driving, such as in a ...
Page 119 Continuously variable transmission (CVT) (if so equipped) Unlike the manual transaxle, sports mode When returning to “D” (DRIVE) operation, “L” LOW allows shifting with the accelerator pedal the selector lever position display will change depressed. to the “D” (DRIVE) position. This position is for driving up very steep hills and for engine braking at low speeds when CAUTION...
Page 120 Continuously variable transmission (CVT) (if so equipped) NOTE CAUTION Type 1 Type 2  To maintain good running performance, the  To prevent sudden acceleration, never run transmission may refuse to perform an the engine at high rpms when shifting from upshift when the sportronic steering wheel the “P”...
Page 121: Electronically Controlled 4Wd System (If So Equipped)
Immediately have your vehicle Drive mode Function checked at an authorized Mitsubishi Motors This mode is for eco- CAUTION dealer or a repair facility of your choice. nomical driving on  To avoid transmission overheating, never try...
Page 122 Electronically controlled 4WD system (if so equipped) Drive mode Function Drive mode-selector Display Drive mode The default mode. Type 1 Type 2 This mode is for The drive mode can be changed by pressing automatically con- the drive mode-selector while the ignition trolling the distribu- switch or the operation mode is in ON.
Page 123: 4-Wheel Drive Operation
4-wheel drive operation Type 1 Type 2 Drive mode indicator CAUTION  If the selected drive mode indicator is blink- ing, the vehicle switches automatically to Type 1 front-wheel drive in order to protect the drive-system components, and drive mode selection is no longer possible with the drive mode-selector.
Page 124 Turning sharp corners on sand and mud and when driving through  Mitsubishi Motors is not responsible to the water because sufficient traction may not be operator for any damage or injury caused or When turning a sharp corner in “4WD available in certain circumstances.
Page 125 4-wheel drive operation NOTE CAUTION NOTE  Maintain a safe distance between vehicles,  If the vehicle becomes stuck in sandy or • If the engine coolant temperature display avoid sudden braking, and use engine brak- muddy roads, it can often be moved with a flashes on the information screen in the ing (downshifting).
Page 126: Inspection And Maintenance Following Rough Road Operation
Do not change the gearshift lever posi- Mitsubishi Motors dealer or a repair facil- tion (M/T) or the selector lever position Since the driving torque can be applied to the ity of your choice as soon as possible to (CVT) while driving through water.
Page 127: Service Brake
Service brake When driving down a long or steep hill, use CAUTION CAUTION engine braking by downshifting.  Always use tires of the same size, type, and  Do not tow 4-wheel drive vehicles with the brand that have no wear differences. Using front or rear wheels on the ground (Type A WARNING tires of different size, type, brands or degree...
Page 128: Hill Start Assist
Mitsubishi Motors dealer or a repair facil- ity of your choice immediately. To operate N00562700059 1. Stop the vehicle completely using the brake pedal.
Page 129 Hill start assist 2. On vehicles equipped with manual trans- Warning display type 1 NOTE axle, place the gearshift lever into the 1st • On vehicles equipped with manual trans- positon. axle, the gearshift lever is in the following On vehicles equipped with a continuously position.
Page 130: Brake Assist System
Brake assist system NOTE Driving hints Brake assist system  When the brake assist system is in use while N00567301103  When using the anti-lock brakes (sudden driving, you may feel as if the depressed The brake assist system is a device assisting braking), steering is slightly different brake pedal is soft, the pedal moves in small drivers who cannot depress the brake pedal...
Page 131 (The standard brake system is functioning cle checked by an authorized Mitsubishi normally.) If this happens, take your vehicle Motors dealer or repair facility of your to an authorized Mitsubishi Motors dealer or choice as soon as possible. a repair facility of your choice. 5-68...
Page 132: Electric Power Steering System (Eps)
Avoid hard braking and high-speed driving. the same time Stop the vehicle in a safe place and contact an authorized Mitsubishi Motors dealer or repair Warning light facility of your choice. NOTE  The anti-lock braking system warning light...
Page 133: Active Stability Control (Asc)
When the system has ing can lead to accidents. It is the driver’s by an authorized Mitsubishi Motors dealer or cooled down, the steering effort will return responsibillty to drive carefully, This means a repair facility of your choice as soon as to normal.
Page 134 Active stability control (ASC) start moving from a stopped condition. It also CAUTION When the ASC is deactivated, the dis- provides sufficient driving force and steering play/indicator will turn on. To reactivate the  Do not install any aftermarket limited slip performance as the vehicle turns while press- ASC, momentarily press the “ASC OFF”...
Page 135 Active stability control (ASC) NOTE CAUTION NOTE  When moving out of mud, sand or fresh  When a compact spare tire has been put on  When display/indicator blinks, ASC is snow, pressing the accelerator pedal may not your vehicle, the gripping ability of the tire operating, which means that the road is slip- allow the engine speed to increase.
Page 136: Cruise Control (If So Equipped)
For details, refer to “Towing” on page 8-12. authorized Mitsubishi Motors dealer or a  Cruise control may not be able to keep your repair facility of your choice as soon as pos- speed on uphills or downhills.
Page 137 Cruise control (if so equipped) Cruise control switches To activate NOTE  If the cruise control is on when the following N00518401409 1. With the ignition switch in “ON” position operation is performed, cruise control will be or the operation mode is in ON, press the on automatically the next time you start the engine.
Page 138 Cruise control (if so equipped) To increase your speed in small amounts, NOTE push up the RES + switch for less than about To decrease the set speed  When you release the SET - switch, the vehi- 1 second and release it. cle speed will be set.
Page 139 Cruise control (if so equipped) To slow down your speed in small amounts, push down the SET - switch for less than To temporarily increase or To temporarily decrease the speed about 1 second and release it. decrease the speed Each time you push down the SET - switch, Depress the brake pedal to decrease the your vehicle will slow down by about 1 mph...
Page 140 Turn the ignition switch to the “OFF” or Mitsubishi Motors dealer or a repair facility  When your speed slows to about 25 mph “ACC” position. of your choice.
Page 141 Forward Collision Mitigation system (FCM) (if so equipped) Put the operation mode in OFF or ACC. the collision and, if possible, to avoid the col- WARNING  “CRUISE” indicator light is turned OFF. lision.  The FCM is designed to help avoid certain Stop lights are illuminated during automatic frontal collisions or reduce the crash braking.
Page 142 Forward Collision Mitigation system (FCM) (if so equipped) Forward collision warning FCM braking function WARNING function  If the ASC is turned off, the FCM braking N00577700099 When the FCM judges that a collision with function will not operate. Refer to “Active N00577400067 the vehicle or the pedestrian straight-ahead is stability control”...
Page 143 Forward Collision Mitigation system (FCM) (if so equipped) WARNING WARNING WARNING  The forward collision warning function • When driving on a slippery road covered • When the sensor is affected by strong and/or the FCM braking function may not by rain water, snow, ice, etc.
Page 144 Forward Collision Mitigation system (FCM) (if so equipped) WARNING WARNING WARNING  When the system recognizes driver’s • When passing a vehicle, a pedestrian or • When the FCM detects a long object car- steering or accelerating actions as evasive an object closely.
Page 145 Forward Collision Mitigation system (FCM) (if so equipped) FCM ON/OFF switch To turn on/off the FCM To change forward collision warn- ing distance N00577800087 Every time the operation mode is put in This switch is used to turn on or off the FCM, “ON”, the FCM the ignition switch is turned and also to select the distance which will trig- The distance to the vehicle ahead which trig-...
Page 146 If the message continues showing, there is a Contact an authorized Mitsubishi Motors screen of the multi-information display possibility that the FCM has a malfunction. dealer for inspection of the sensor.
Page 147 If the message continues showing, there is a possibility that the FCM has a malfunction. If the message remains even after the ignition Contact an authorized Mitsubishi Motors switch is turned to the “OFF” position and dealer for inspection of the sensor.
Page 148: Forward Collision Mitigation System (Fcm) (If So Equipped)
 Automatic High Beam (AHB) authorized Mitsubishi Motors dealer. If you need to replace the windshield, con- tact an authorized Mitsubishi Motors dealer.  The sensor emits infrared rays when the • Do not attempt to detach or disassemble the operation mode is in ON.
Page 149: Lane Departure Warning (Ldw) (If So Equipped)
Lane Departure Warning (LDW) (if so equipped) To turn on/off the LDW Laser classification label N00578000060 NOTE  The LDW is turned on when the vehicle is shipped from the factory.  The currently selected LDW setting (on or off) is stored even when the ignition switch is turned to the “OFF”...
Page 150 Lane Departure Warning (LDW) (if so equipped)  The hazard warning light is being oper- NOTE ated or has been operated in the past 7  If the lane markers are only on one side of seconds. the road, the LDW will operate only for the appropriate side where the lane marker is Lane departure warning drawn.
Page 151 • Avoid applying a shock or load to the sen- sor. • Do not attempt to detach or disassemble the sensor. • Use only Mitsubishi Motors Genuine parts when replacing the windshield wipers. NOTE  When driving conditions are not suitable to use the LDW, turn off the LDW.
Page 152: Tire Pressure Monitoring System
Contact your authorized The tire pressure monitoring system uses tire Be sure to check the tire inflation pressures Mitsubishi Motors dealer for inspection of the inflation pressure sensors (A) on the wheels as described in “Tires” on page 9-14.
Page 153 N00532700281 restarted, have the vehicle inspected by an authorized Mitsubishi Motors dealer. In such situations, a malfunctioning of the system may be preventing the monitoring of When the ignition switch is turned to the the tire pressure.
Page 154 Tire pressure monitoring system pressure telltale when one or more of your TPMS malfunctions may occur for a variety NOTE tires is significantly under-inflated. of reasons, including the installation of  In addition, the warning display is displayed Accordingly, when the low tire pressure tell- replacement or alternate tires or wheels on the on the information screen in the multi-infor- tale illuminates, you should stop and check...
Page 155 Motors dealer. If the tire repair is not done by ent temperature. If the vehicle is subjected to an authorized Mitsubishi Motors dealer, it is 2. If the tire pressure monitoring system large variations in ambient temperature, the not covered by your warranty.
Page 156: Rear-View Camera
Rear-view camera wheel replacement is not done by an autho- CAUTION WARNING rized Mitsubishi Motors dealer, it is not cov-  Changes or modifications not expressly  The view on the screen is limited, and ered by your warranty. approved by the manufacturer for compli- objects outside the view, such as under the ance could void the user’s authority to oper-...
Page 157 Rear-view camera CAUTION CAUTION • Do not splash hot water directly on the lens. • When there is an upward slope at the back. (Case 2) • Do not spray the camera and its surround- ings with high-pressure water. • Make sure that the liftgate is securely Case 1 closed when backing up.
Page 158: Instrument Cluster
Instrument cluster 3- Speedometer  P.5-95 CAUTION NOTE 4- Rheostat meter illumination button   The reference lines for distance and vehicle  On vehicles equipped with Smartphone Link P.5-96 width are intended to indicate the distance to Display Audio, it is possible to change the a flat object such as a level, flat road surface.
Page 159 Instrument cluster Tachometer Rheostat meter illumination button N00519200289 The tachometer shows engine revolutions per N00554901251 minute. This allows the driver to determine Each time you press this button, there is a the most efficient selector position and engine sound and the brightness of the instruments speed combinations.
Page 160: Multi-Information Display
Multi-information display Multi-information display N00555001406 The multi-information display displays warnings, the odometer, trip odometer, service reminder, engine coolant temperature, fuel remaining, out- side temperature, selector lever position, all-wheel drive operation status, average and momentary fuel consumption, driving range, average speed, instrument brightness, etc. It is also possible to change elements such as the language and units used on the multi-information display.
Page 161 Multi-information display momentary fuel consumption, driving range, 8- Selector lever position display screen NOTE (if so equipped)  P.5-107 and average speed.  The display screen is different depending on 9- Outside temperature display screen  It is also possible to change elements such as whether the ignition switch or the operation the language and units used on the multi- P.5-107...
Page 162 Multi-information display This mark is also displayed if there is another Odometer/Trip odometer Type 1 warning other than the one displayed. When N00555400113 the cause of the warning display is elimi- Each time you lightly press the multi-infor- nated, the warning goes out automatically.
Page 163 Multi-information display seconds or more. Only the currently dis- to the appropriate page and take the necessary NOTE played value will be reset. measures.  If there is no warning display, the switching When the cause of the warning display is ...
Page 164 Multi-information display screen display from before the warning and switch a few times, the warning display Information screen (With the screen you switched from is redisplayed. warning (A) is displayed. ignition switch is turned from Refer to “Information screen (With ignition the “OFF”...
Page 165 Multi-information display System check screen Service reminder Warning display screen (With ignition switch or opera- When the ignition switch is turned to the When the time for periodic inspection arrives, tion mode in ON) “ON” position or the operation mode is the warning display is displayed for a few N00555200182 changed to ON, the system check screen is...
Page 166 Multi-information display Information screen (With igni- 1- Odometer (Type1)/Trip odometer Type 1 tion switch or operation mode 2- Odometer (Type1)/Trip odometer 3- Service reminder in ON) Engine coolant temperature display N00556201245 (Type 1) Each time you lightly press the multi-infor- When there is no warning display 5- Driving range display (Type 1) mation meter switch, the display screen...
Page 167 Multi-information display NOTE CAUTION NOTE  When there is information to be announced,  The display setting can be changed to the  If the engine is overheating, “ ” will blink. such as a system fault, the tone sounds and preferred units (miles or km).
Page 168 Multi-information display [For vehicles equipped with the F.A.S.T.- NOTE Manual reset mode key]  “---” is displayed when the average speed Change the operation mode to ON from  When the average fuel consumption is cannot be measured. ACC or OFF. being displayed, if you hold down the ...
Page 169 Multi-information display The ignition switch has been set to the Momentary fuel consumption dis- Function setting screen “ACC” or “OFF” position for about 4 play hours or more. The “Display language”, “Temperature unit”, “Fuel consumption unit”, and “Average fuel [For vehicles equipped with the F.A.S.T.- While driving, the momentary fuel consump- consumption and speed reset method”...
Page 170 Multi-information display NOTE Selector lever position display Returning to the display screen from before the warning display screen (if so equipped)  Warning display screens with a “ ” or Even if the cause of the warning display is N00556400064 “...
Page 171 (B) on the fuel remaining display flashes. If the warning display appears, refuel as soon as  The service reminder time can be modified possible. by an authorized Mitsubishi Motors dealer, CAUTION to adjust for severe usage, etc. Refer to “Severe maintenance schedule” in your vehi- ...
Page 172 The “---” display can be reset while the igni- tion is due. Contact an authorized tion switch or the operation mode is in OFF. Mitsubishi Motors dealer or a repair facil- When the display is reset, the time until the ity of your choice to have the system next periodic inspection is displayed and the checked.
Page 173 CAUTION Type 1  If you accidentally reset the display, consult  Always make sure that the warning display an authorized Mitsubishi Motors dealer for goes out before beginning to drive. assistance. Changing the function settings Door ajar warning display...
Page 174 Multi-information display CAUTION NOTE Changing the reset mode for aver- age fuel consumption and average  For safety, stop the vehicle before operating.  If no operations are made within about 15 While driving, even if you operate the multi- seconds of the menu screen being displayed, speed information meter switch, the function set-...
Page 175 Multi-information display 3. Press and hold the multi-information Changing the fuel consumption Auto reset mode meter switch (for about 2 seconds or display unit more) to switch in sequence from A or 1  When the average fuel consumption and (Auto reset) ...
Page 176 Multi-information display 3. Press and hold the multi-information 1. Press and hold the multi-information NOTE meter switch (for about 2 seconds or meter switch (for about 2 seconds or  The display units for the driving range, the more) to display “AVG UNIT” (fuel con- more) to switch from the setting mode average fuel consumption, the average speed sumption display unit setting).
Page 177 Multi-information display NOTE Operation sound setting Type 1  If the battery is disconnected, the memory of N00557400117 the unit setting is erased and is automatically You can turn off the operation sounds of the set to °F (°C). multi-information meter switch and rheostat meter illumination button.
Page 178 Multi-information display 3. Press and hold the multi-information 2. Lightly press the multi-information meter 4. Lightly press the multi-information meter meter switch (for about 2 seconds or switch to select “ALARM” (rest time set- switch to select the time until the display more) to switch in sequence from ON ting).
Page 179 Multi-information display 1. Press and hold the multi-information Returning to the factory settings Type 1 meter switch for about 2 seconds or more N00557600151 to switch from the setting mode screen to All of the function settings can be returned to the menu screen.
Page 180 Multi-information display 3. Press and hold the multi-information meter switch (for about 5 seconds or more), the buzzer sounds and all of the function settings are returned to the fac- tory settings. NOTE  The factory settings are as follows. •...
Page 181: Indicator Light, Warning Light, And Information Screen Display List
Indicator light, warning light, and information screen display list Indicator light, warning light, and information screen display list N00557700048 Indicator and warning light list N00557801365 Type 1 Type A Type B 5-118 Features and controls...
Page 182 Indicator light, warning light, and information screen display list Type 2 Type A Type B 10- Seat belt reminder/warning light  17- Forward Collision Mitigation system 1- Position indicator  P.5-135 P.4-16 (FCM) OFF indicator (if so equipped) 2- High beam indicator  P.5-135 ...
Page 183 • Abnormal voltage or a static electricity discharge is generated by the operation of your vehicle’s electronics (including after-market parts). If the warning display has occurred a number of times, take your vehicle to an authorized Mitsubishi Motors dealer or a repair facility of your choice and have the system checked.
Page 184 Indicator light, warning light, and information screen display list Screen type 1 Screen type 2 Cause Do this (Reference)  You have forgotten to turn off the lights. Refer to “Light auto-cutout function (head- lights and other lights)” on page 5-141. ...
Page 185 Refer to “Free-hand Advanced Security Trans- mitter (F.A.S.T.-key)” on page 5-11. —  There is a fault in the electronic immobi-  Contact an authorized Mitsubishi Motors lizer. (Anti-theft starting system). dealer or a repair facility of your choice to —...
Page 186  Park your vehicle in a safe place as soon as possible and contact an authorized — Mitsubishi Motors dealer or a repair facil- ity of your choice to have the system checked. Warning display list (With ignition switch or operation mode is in ON)
Page 187 Do this (Reference)  There is a fault in the EPS.  Have the vehicle inspected by an autho- rized Mitsubishi Motors dealer or a repair facility of your choice as soon as possible. Refer to “Electric power steering system (EPS)”...
Page 188 Indicator light, warning light, and information screen display list Screen type 1 Screen type 2 Cause Do this (Reference)  Immobilizer is registered. Refer to “Customer key programming (Except for vehicles sold in Canada)” on page 5-5. Refer to “Customer F.A.S.T.-key program- ming (Except for vehicles sold in Canada)”...
Page 189  There is a fault in the electrical system.  Park your vehicle in a safe place as soon as possible and contact an authorized — Mitsubishi Motors dealer or a repair facil- ity of your choice to have the system checked.  The engine is overheated.
Page 190  Park your vehicle in a safe place as soon as system. possible and contact an authorized Mitsubishi Motors dealer or a repair facil- ity of your choice to have the system checked. Refer to “Oil pressure warning display” on page 5-138.
Page 191  There is a fault in the charging system.  Park your vehicle in a safe place as soon as possible and contact an authorized Mitsubishi Motors dealer or a repair facil- ity of your choice for assistance. Refer to “Charging system warning light”...
Page 192 Screen type 2 Cause Do this (Reference)  There is a fault in the CVT.  Contact an authorized Mitsubishi Motors dealer or a repair facility of your choice to have the system checked. Refer to “Continuously variable transmis- sion (CVT)” on page 5-51.
Page 193 — (flashing in yellow)  There is a fault in the Lane Departure  Contact an authorized Mitsubishi Motors Warning (LDW). dealer or a repair facility of your choice to — have the system checked.
Page 194 Indicator light, warning light, and information screen display list Screen type 1 Screen type 2 Cause Do this (Reference)  There is a fault in the sensor.  Contact an authorized Mitsubishi Motors dealer. Refer to “Forward Collision Mitigation system (FCM): System problem warning” — on page 5-83.
Page 195 Screen type 1 Screen type 2 Cause Do this (Reference)  There is a fault in the system of Automatic  Contact an authorized Mitsubishi Motors High Beam (AHB). dealer. — Refer to “Automatic High Beam (AHB): System problem warning” on page 5-146.
Page 196 Indicator light, warning light, and information screen display list The operation status of each system is displayed on the information screen. For further details, refer to the appropriate page for each system. NOTE  When operating each system, confirm that the operation status of the system has changed on the information screen. However, the operation status of the system may not be displayed immediately after the warning display appears even if the system is operated.
Page 197 This informs you that a periodic inspection is due. Screen type 1 Screen type 2 Do this Have an inspection made by an authorized Mitsubishi Motors dealer. For further details, refer to “Service reminder” on page 5-108. 5-134 Features and controls...
Page 198: Indicators
Indicators The rest time can be set. Screen type 1 Screen type 2 Do this Park the vehicle in a safe place, turn off the engine, and take a rest. Use this display as rough guide for taking rests during a long drive. The interval from the start of your trip until this message is displayed can be set.
Page 199: Warning Lights
“ON” position (engine off) or Mitsubishi Motors dealer or a repair facility of your choice as soon as possible. the operation mode is put in ON.
Page 200: Information Screen Display
This will make it the system checked at an authorized difficult to diagnose the cause of future prob- Mitsubishi Motors dealer or a repair facility lems. of your choice.  If the engine malfunction indicator comes on...
Page 201 Mitsubishi Motors dealer or a repair display. The warning light in the instrument facility of your choice. cluster also illuminates.
Page 202: Combination Headlights And Dimmer Switch
 High intensity discharge headlights (if so engine oil level is proper, have your vehicle equipped) have the following characteristics: checked at an authorized Mitsubishi Motors The combinations of switch operations and • The light will gradually change to bluish dealer or a repair facility of your choice.
Page 203 Combination headlights and dimmer switch The combinations of switch operations and Parking, tail, front and rear side- OFF All lights off illuminated lights differ in accordance with marker lights, license plate and Parking, tail, front and rear side- the following conditions. instrument panel lights on marker lights, license plate and instrument panel lights on...
Page 204 Have the system checked beep will sound to remind you to remove by an authorized Mitsubishi Motors dealer or Headlights and other lights on a repair facility of your choice.
Page 205 F.A.S.T.-key, if the driver’s door is opened remind you to turn off the lights. See your authorized Mitsubishi Motors and the operation mode is put in OFF, the • If the operation mode is changed to any dealer for details.
Page 206 Combination headlights and dimmer switch the light switch to the “OFF” position to stop go back to normal when you let go. While the Automatic High Beam (AHB) the tone. high beam is on, you will see a blue light on so equipped) the instrument panel.
Page 207 Combination headlights and dimmer switch 2. The Automatic High Beam (AHB) indica- How to use the Automatic High tor will go off. Beam (AHB) 3. The Automatic High Beam (AHB) switch N00593600041 is pressed again, the Automatic High 1. Rotate the light switch to “ ”...
Page 208 • When the windshield is replaced, use the the headlight beam switching timing: • A light, which is similar to the headlights or Mitsubishi Motors genuine parts. tail lights, is shining around your vehicle. • How brightly the exterior lights of a vehicle in front or oncoming vehicle illuminate.
Page 209 Contact authorized type of the problem. Mitsubishi Motors dealer for inspection of the system. NOTE  The Automatic High Beam (AHB) deactivation due to fault  If the sensor or its surrounding area becomes extremely high temperature when parking the vehicle under a blazing sun, the “AHB...
Page 210 • The welcome light function can be deacti- after waiting for a while, there is a possibility vated. that the sensor has a malfunction. Contact an For details, consult a Mitsubishi Motors authorized Mitsubishi Motors dealer for dealer. inspection of the sensor.
Page 211: Headlight Leveling Switch (If So Equipped)
 It is possible to modify functions as follows: • The time that the headlights remain on can be changed. • The coming home light function can be deactivated. For details, consult a Mitsubishi Motors dealer. 5-148 Features and controls...
Page 212: Turn Signal Lever
Mitsubishi Motors dealer or a repair used when the vehicle is in motion, except for complete. There may be times when the lever facility of your choice.
Page 213: Front Fog Light Switch (If So Equipped)
Front fog light switch (if so equipped) NOTE NOTE Windshield wipers  If the flashers are used for several hours, the  If the headlights are switched to high beam, battery will run down. This could make it the front fog lights will go out; they will illu- NOTE difficult or impossible to restart your vehicle.
Page 214 For further information, please contact your If the blades are frozen to the windshield or To adjust intermittent intervals authorized Mitsubishi Motors dealer or a rear window, do not operate the wipers until repair facility of your choice. the ice has melted and the blades are freed, With the lever in the “INT”...
Page 215 Have the vehicle checked • When cleaning the outside surface of the Rain sensor (if so equipped) at an authorized Mitsubishi Motors dealer or windshield, if you wipe with a cloth the rain a repair facility of your choice.
Page 216 To stop the wipers, move the “-”- Lower sensitivity to rain lever to the “OFF” position.  Contact an authorized Mitsubishi Motors dealer or a repair facility of your choice The wipers will operate once if the lever is NOTE when replacing the windshield glass.
Page 217 Wiper and washer switch Windshield washer NOTE Rear window wiper and washer These functions are not activated when the N00504601383 N00523201421 The rear window wiper and washer can be vehicle is shipped from the factory. The windshield washer can be operated with To activate or deactivate these functions, operated when the ignition switch or the the ignition switch or the operation mode is in...
Page 218: Electric Rear Window Defogger Switch
“INT” position.  During cold weather, add a recommended See your authorized Mitsubishi Motors washer solution that will not freeze in the dealer for details. washer fluid reservoir. Otherwise the washer NOTE ...
Page 219: Horn Switch
Horn switch The indicator light (A) will come on when CAUTION you press the electric rear window defogger  Use the rear window defogger only after the switch. Electric current will flow through the engine has started and is running. Be sure to heating wires on the rear window to help turn the defogger switch off immediately clear away moisture or frost.
Page 220 USB input terminal (if so equipped) How to connect a USB memory NOTE device  Use a genuine connector cable from Apple Inc. N00566801198 1. Park your vehicle in a safe place and turn 3. Connect the connector cable (A) to the the ignition switch to the “OFF”...
Page 221: Sun Visors
Sun visors for details about the types of connectable Vanity mirror Type 2 devices and supported file specifications. A vanity mirror is fitted to the back of the sun Sun visors visor. Type 1 N00524601392 A vanity mirror is fitted to the back of the sun Pull the sun visor downward (1) to reduce visor.
Page 222: 12 V Power Outlets
12 V power outlets Type 1 12 V power outlets Floor console box N00525001713 Accessories can be operated while the igni- CAUTION tion switch or the operation mode is in ON or  Be sure to use a “plug-in” type accessory ACC.
Page 223 HomeLink® Wireless Control System (if so equipped) WARNING NOTE Before programming Home- ® Link  You can program a maximum of 3 devices. ®  Do not use HomeLink with any garage To change or replace any of the 3 devices door opener that lacks safety stop and N00584600032 after it has been initially programmed, you...
Page 224 HomeLink® Wireless Control System (if so equipped) NOTE  Some devices may require you to replace this ® “Programming a new HomeLink ” step 3 with procedures noted in the “Gate operator / Canadian programming” section. If the indi- cator light does not change to rapidly flash- ing green or continuously lit green after ®...
Page 225 HomeLink® Wireless Control System (if so equipped) • If the device does not operate, continue NOTE NOTE ® with “Programming a new HomeLink ”  In the event that there are still programming  If programming a garage door opener or gate steps 5 to 7 to complete the program- difficulties or questions, additional Home- operator, it is advised to unplug the device...
Page 226 HomeLink® Wireless Control System (if so equipped) 3. Once the door has stopped, press and release the “Learn” or “Smart” button on the garage door opener (refer to your garage door opener owner’s manual for the location of the “Learn” button). Both ®...
Page 227 HomeLink® Wireless Control System (if so equipped) ® ® The HomeLink has the capability of listen- 1. Press and hold the 2 outer HomeLink NOTE ing to these messages at a range up to 820.2 buttons for at least 10 seconds. The indi- ...
Page 228: Interior Lights
Interior lights CAUTION Dome light (front)/Reading lights  The transmitter has been tested and complies with FCC and IC rules. N00525401472 Changes or modifications not expressly approved by the party responsible for com- Dome light (front) pliance could void the user’s authority to operate the device.
Page 229 Interior lights • When the remote control transmitter of 1- ( Reading lights the keyless entry system or the F.A.S.T.- The light illuminates regardless of N00537600155 key is used to lock the vehicle. whether a door or the liftgate is open or Regardless of the position of the dome light •...
Page 230 Interior lights NOTE Sunshade illumination dim- Sunshade illumination (if so ming control switch  When the F.A.S.T.-key was used to start the (if so equipped) equipped) engine, if the operation mode is put in OFF N00568500020 N00568601031 while the doors and liftgate are closed, the light illuminates and after approximately 30 seconds it goes off.
Page 231: Storage Spaces
See your authorized Mitsubishi Motors time until the dome light go off is also Storage spaces dealer for details. adjusted automatically at the same time. See your authorized Mitsubishi Motors dealer for N00526400469 The sunshade illumination also turns on when details. CAUTION a door or the liftgate is opened, and goes off ...
Page 232 Storage spaces NOTE  Do not leave valuables in any storage space when leaving the vehicle. NOTE NOTE  When the lights are illuminated with the  There is a limit to the size of pens that can be stored in the holder. Forcing large pens into light switch in the “...
Page 233: Cup Holders
Cup holders NOTE WARNING  The floor console box can also be used as an  Do not spray water or spill beverages arm rest. inside the vehicle. If the switches, wires, or electrical components become wet, they could malfunction or cause a vehicle fire. If you accidentally spill a beverage, wipe up as much liquid as possible.
Page 234: Bottle Holder
Bottle holder There are bottle holders located on the front Cargo area cover (if so doors. equipped) N00500101032 CAUTION  Do not place luggage or other items on the cargo area cover. Any items on the cargo area cover would obstruct your rearward view, and they could fly forward and cause injuries or other mishap in the event of hard braking.
Page 235: Assist Grips
Assist grips body weight. They are intended for use only CAUTION while seated in the vehicle.  Lightly push the cargo area cover to make sure that the concave portion (A) is set firmly in the protruding portion (B) of the liftgate.
Page 236: Luggage Hooks
Luggage hooks Luggage hooks N00528501285 There are hooks on the sides of the luggage compartment for use in securing luggage. CAUTION  Do not load the luggage higher than the top of the seatback. Be sure that luggage is firmly secured. Restricted rear vision or flying objects enter- ing the passenger compartment during sud- den braking could result in a serious...
Page 238 Driving safety Driving precaution ................6-2 Fuel economy ...................6-2 Driving, alcohol and drugs ..............6-2 Floor mat ..................6-3 Vehicle preparation before driving ..........6-4 Safe driving techniques ..............6-4 Driving during cold weather ............6-5 Braking ....................6-5 Parking .....................6-6 Loading information ................6-7 Cargo loads ..................6-10 Trailer towing ................6-12...
Page 239: Driving Precaution
Driving precaution to perform satisfactorily in off-road condi-  Keep your tires inflated to the recom- Driving precaution tions. mended pressures. Always drive safely and steer the vehicle  When you drive on highways or dry N00629301106 carefully. Avoid operating the vehicle in a improved roads, set the drive mode-selec- WARNING manner that might require sharp turns or...
Page 240: Floor Mat
Floor mat pharmacist before driving while under the 2. Align the floor mat with the installation WARNING influence of any of these medications. holes over the retaining clips.  Always install the mat with the correct 3. Secure the floor mat with retaining clips. side facing down.
Page 241: Vehicle Preparation Before Driving
 Make sure that infants and small children only by an authorized Mitsubishi Motors are properly restrained in accordance with  Drive defensively. Be aware of traffic, all laws and regulations. dealer.
Page 242: Driving During Cold Weather
Have the vehicle serviced by an ing the engine, allow a short warm-up fuel. authorized Mitsubishi Motors dealer or a time to distribute oil to all cylinders. Then repair facility of your choice at regular inter- drive your vehicle slowly.
Page 243: Parking
Parking When driving in cold weather For vehicles equipped with man- WARNING ual transaxle  Leaving the engine running risks injury or death from accidentally moving the gear- On snowy roads, ice can form on the braking shift lever (manual transaxle) or the selec- system, making the brakes less effective.
Page 244: Loading Information
Loading information  Vehicle maximum load on the tire: load  Production options weight: the combined When leaving the vehicle on an individual tire that is determined by weight of those installed regular produc- distributing to each axle its share of the tion options weighing over 5 lbs (2.3 kg) Always remove the key from the ignition maximum loaded vehicle weight and...
Page 245 Loading information The resulting figure equals the available amount of cargo and luggage load capacity. For exam- ple, if the “XXX” amount equals 1400 lbs. and there will be five 150 lbs. passengers in your vehi- cle, the amount of available cargo and luggage load capacity is 650 lbs.
Page 246 Loading information NOTE The above steps for determining  correct load limit were written in accordance with U.S.A. regula- tions. Your vehicle cannot tow a trailer, so step 6 is irrelevant. Driving safety...
Page 247: Cargo Loads
Cargo loads NOTE The following table shows examples on how to calculate total cargo/load capacity of your vehicle with varying  seating configurations and number and size of occupants. This table is for illustration purposes only and may not be accurate for the seating and load capacity of your vehicle. For the following example the combined weight of occupants and cargo should never exceed 865 lbs (392 kg).
Page 248 Cargo loads occupants from the vehicle capacity weight. WARNING WARNING For additional information, if needed, refer to  Do not load cargo or luggage higher than  The total weight of all occupants and lug- “Steps for Determining Correct Load Limit” the top of the seatback.
Page 249: Trailer Towing
Trailer towing CAUTION Refitting the covers  Before driving and after traveling a short dis- 1. With each cover, put the tabs (C) on the tance, always check the load to make sure it cover in the holes (D) in the roof. is securely fastened to the roof carrier.
Page 250 Trailer towing WARNING  Do not use this vehicle for trailer towing. It may not be possible to maintain control or adequate braking. Driving safety 6-13...
Page 252 Comfort controls Vents ....................7-2 Manual air conditioning ..............7-4 Automatic air conditioning-Type1 (if so equipped) ......7-9 Automatic air conditioning-Type2 (if so equipped) ......7-14 Important air conditioning operating tips ........7-19 Air purifier ..................7-20 General information about your radio ...........7-20...
Page 253: Vents
Vents 2- Open Vents N00729900249 NOTE  On rare occasions, air from the vents of an air-conditioned vehicle may be foggy. This is only moist air cooling suddenly and does not indicate a problem.  Do not let drinks or other liquids get into the vents as they could prevent the air condition- ing from operating normally.
Page 254 Vents NOTE  With the mode selection dial between the “ ” and “ ” positions, air flows mainly to the upper part of the passenger compart- ment. With the mode selection dial between the “ ” and “ ” positions, air flows mainly to the leg area.
Page 255: Manual Air Conditioning
Manual air conditioning Control panel N00730500261 Temperature control dial Manual air conditioning A- Temperature control dial N00736600176 N00730301413 B- Air selection switch Turn the temperature control dial clockwise C- Blower speed selection dial CAUTION to make the air warmer. Turn it counterclock- D- Air conditioning switch ...
Page 256 Manual air conditioning quickly remove fog or frost from the wind- NOTE NOTE shield.  While the engine coolant temperature is low,  When the air conditioning operates with the the temperature of the air from the heater air selection switch in the outside air posi- To change the air selection, simply press the will be cool/cold until the engine warms up, tion, the system automatically determines...
Page 257 (A) does not blink, there is no problem. If it does blink, have it Air conditioning switch  Disable automatic air control: checked at an authorized Mitsubishi Motors Even when the air conditioning operates, N00731001505 dealer or a repair facility of your choice.
Page 258 Manual air conditioning 3. Push the air conditioning switch (B). Operating the air conditioning NOTE 4. Change the temperature by turning the system  For quick heating, set the blower speed control dial clockwise or counterclock- selection dial to the position shown in the wise.
Page 259 Manual air conditioning 1. Set the mode selection dial to the “ ” Combination of unheated air and Defrosting or defogging (wind- position. heated air shield, door windows) 2. Select your desired blower speed by turn- N00731300266 N00731401583 ing the blower speed selection dial. Set the mode selection dial to the positions CAUTION 3.
Page 260: Automatic Air Conditioning-Type1 (If So Equipped)
Automatic air conditioning-Type1 (if so equipped) NOTE Control panel NOTE  While the mode selection dial is set to the  There is an interior air temperature sensor N00711801608 (G) in the illustrated position. “ ” position, the air conditioning com- Never place anything over the sensor, since pressor will run automatically.
Page 261 Contact your Mitsubishi Motors dealer or a To change the air selection, simply press the repair facility of your choice for assistance. air selection switch. A sound will be made Refer to “Personalizing the air conditioning...
Page 262 Automatic air conditioning-Type1 (if so equipped)  Recirculated air {Indicator light (A) ON} Press the air selection switch for about 10 NOTE Air is recirculated inside the passenger seconds or longer.  If the mode selection dial is set between compartment.
Page 263  Changing the settings no problem. If it does blink, have it checked Press the air conditioning switch for about at an authorized Mitsubishi Motors dealer or 10 seconds or longer. a repair facility of your choice. When the setting has changed, the system ...
Page 264 Automatic air conditioning-Type1 (if so equipped) 1. Set the blower speed selection dial to the selection dial and the mode selection dial to  For ordinary defrosting “AUTO” position. the desired positions. To return to automatic Use this setting to keep the windshield and 2.
Page 265: Automatic Air Conditioning-Type2 (If So Equipped)
Automatic air conditioning-Type2 (if so equipped)  For quick defrosting NOTE Control panel  When defrosting, do not set the temperature N00711801611 control dial to the maximum cool position. This will blow cool air on the window glass and fog it up. Automatic air conditioning- Type2 (if so equipped)
Page 266 When the dial is set to air conditioning switch to match your per- sonal preferences. the “OFF” position, all fan-driven airflow Contact your Mitsubishi Motors dealer or a will stop. repair facility of your choice for assistance. Refer to “Personalizing the air conditioning switch (Changing the function setting)”...
Page 267 Automatic air conditioning-Type2 (if so equipped) page7-16. Outside air is introduced into the passen- Personalizing the air selection ger compartment. (Changing the function setting)  Recirculated air {Indicator light (A) ON} Mode selection dial N00760000021 Air is recirculated inside the passenger N00737100136 You can change the following functions to compartment.
Page 268 If it does blink, have it checked Air conditioning switch at an authorized Mitsubishi Motors dealer or  Changing the settings N00737301425 a repair facility of your choice.
Page 269 Automatic air conditioning-Type2 (if so equipped) 2. Select the temperature control dial to the operation, set the dials to the “AUTO” posi- NOTE desired temperature. The temperature can tion.  While the mode selection dial is set to the be set within a range of around 18 to 32. “...
Page 270: Important Air Conditioning Operating Tips
Have the system inspected by your authorized N00733701388 1. Park the vehicle in the shade whenever Mitsubishi Motors dealer or a repair facility possible. Parking in the hot sun makes the of your choice. vehicle interior extremely hot which then requires more time to cool.
Page 271: Air Purifier
Signal transmission During a long period of disuse Contact your Mitsubishi Motors dealer or a repair facility of your choice for assistance. FM signals do not follow the earth surface The air conditioning should be operated for at...
Page 272 General information about your radio The direct signal from the broadcast station reaches the antenna slightly before the reflected signal. This time difference may cause some reception disturbance or flutter. This problem occurs primarily in urban areas. 25 to 40 mile radius 100 mile radius (40 to 64 km) (160 km)
Page 273 General information about your radio lines, lightning and other types of similar electrical phenomena. 7-22 Comfort controls...
Page 274 For emergencies If the vehicle breaks down ...............8-2 Jump-starting the engine ..............8-2 Engine overheating ................8-4 Jack and tools ...................8-5 How to change a tire ................8-6 Towing ...................8-12 Operation under adverse driving conditions ........8-14 Fuel Pump Shut-off System ............8-15...
Page 275: If The Vehicle Breaks Down
If the vehicle breaks down CAUTION If the vehicle breaks down Jump-starting the engine  Check the other vehicle. It must have a 12- N00836300187 N00836401824 volt battery. If the other system isn’t 12-volt, If your vehicle breaks down on the road, If the engine cannot be started because the both systems can be damaged.
Page 276 Jump-starting the engine WARNING NOTE CAUTION  If the electrolyte fluid is not visible, or  Use the proper cables suitable for the battery  Make sure that the jumper cable will not be looks frozen, DO NOT ATTEMPT JUMP size.
Page 277: Engine Overheating
 Keep the battery out of the reach of chil- immediately and contact an authorized leaks, such as a split radiator hose. Be dren. Mitsubishi Motors dealer or a repair facil- careful as components will be hot. Any ity of your choice for assistance. leak source must be repaired.
Page 278: Jack And Tools
You can start driving again when floor board. the bar graph for the engine coolant tem- perature display returns to the normal zone. 11. Have the system inspected by your autho- rized Mitsubishi Motors dealer or a repair facility of your choice. For emergencies...
Page 279: How To Change A Tire
How to change a tire 5. To prevent the vehicle from rolling when 6. Get the jack, bar and wheel nut wrench How to change a tire it is raised on the jack, place chocks or ready. blocks (A) in front of and behind the tire (Refer to “Jack and tools”...
Page 280 (B) by turning it counterclock- replaced or repaired at an authorized wise. Mitsubishi Motors dealer or a repair facility of your choice as soon as possible.  Do not go over 50 mph (80 km/h) when driv- ing with the compact spare tire.
Page 281 How to change a tire Slowly rotate the wheel nut wrench until the tire is raised slightly off the ground surface. 3. Rotate the jack by hand until the flange WARNING portion (B) fits in the groove (C) at the top ...
Page 282 How to change a tire WARNING WARNING  Do not turn the raised wheel. The tires  Mount the spare wheel with the valve stem that are still on the ground could turn and (I) facing outward. If you cannot see the make your vehicle fall off the jack.
Page 283 How to change a tire 10. Lower the jack all the way and remove it. 11. Check the tire inflation pressure. The rec- ommended tire pressure for your vehicle is listed on the tire and loading informa- tion placard attached to the driver’s door sill as shown in the illustration.
Page 284 How to change a tire CAUTION Wheel cover CAUTION (if so equipped)  If the steering wheel vibrates when driving  Trying to remove the wheel cover with only N00849400195 after changing the tire, have the tire checked your bare hands can seriously injure your for balance at an authorized Mitsubishi fingers.
Page 285: Towing
Towing NOTE  Do not use the tie-down hooks for towing. These hooks are provided only for the pur- pose of transporting the vehicle itself.  Your vehicle cannot tow any other vehicle. There may be local regulations concerning towing in your area. Obey the regulations of the area where you are driving your vehicle.
Page 286 Towing Towing the vehicle by a tow CAUTION truck  [For front-wheel drive vehicle equipped with the active stability control (ASC)] If the vehicle is towed with the ignition CAUTION switch in the “ON” position or the operation mode in ON and only the front wheels or ...
Page 287: Operation Under Adverse Driving Conditions
Operation under adverse driving conditions Towing a front-wheel drive vehi- WARNING On snowy or icy roads cle with front wheels off the  When trying to rock your vehicle out of a  When driving on a road covered with stuck position, make sure that there are no ground (Type C) snow or ice, use snow tires.
Page 288: Fuel Pump Shut-Off System
Fuel Pump Shut-off System CAUTION WARNING  Do not depress the accelerator pedal rapidly.  Mitsubishi Motors recommends that your The vehicle could start moving when it vehicle be inspected by an authorized breaks free from the ice, possibly resulting in Mitsubishi Motors dealer after any colli- an accident.
Page 290 Vehicle care and maintenance Service precautions ................9-2 Cleaning the outside of your vehicle ..........9-41 Catalytic converter ................9-2 Engine hood ..................9-3 View of the engine compartment .............9-5 Engine oil and oil filter ..............9-5 Engine coolant .................9-7 Air cleaner filter ................9-8 Manual transaxle oil (if so equipped) ..........9-9 Continuously variable transmission (CVT) fluid (if so equipped) ................9-9 Transfer oil (All-wheel drive models) ..........9-9...
Page 291: Service Precautions
 Do not smoke or allow open flames around Have you purchased the Mitsubishi Motors Mitsubishi Motors dealer or a repair facility fuel or the battery. The fumes are flamma- Diamond Care Protection Plan? The Plan of your choice.
Page 292: Engine Hood
Engine hood  Do not idle the engine with any spark plug CAUTION Engine hood wires disconnected or removed, such as  Damage to the catalytic converter can result when performing diagnostic tests. N00937501618 if your vehicle is not kept in proper operating ...
Page 293 Engine hood Release the lever and lift the engine hood. CAUTION CAUTION  Always insert the support prop into the hole  Make sure the engine hood is firmly closed specially made for it. Propping the engine before driving. hood at any other place could cause the prop If you drive without the engine hood com- to slip out and lead to an accident.
Page 294: View Of The Engine Compartment
View of the engine compartment View of the engine compart- Engine oil and oil filter ment N00937702053 Good N00937600625 To check and refill engine oil It is normal for an engine to use oil. You may need to add oil between the recommended oil change intervals.
Page 295 Engine Oil is recommended for optimum fuel economy and cold weather starting. Mitsubishi Motors recommends using only If Mitsubishi Motors Genuine 0W-20 Syn- 1- The upper part indicates the quality of engine oils with the ILSAC certification sym- thetic Engine Oil is not available, 5W-20 the oil.
Page 296: Engine Coolant
Take your vehi- coolant. cle to an authorized Mitsubishi Motors dealer Radiator cap or a repair facility of your choice for testing. CAUTION The radiator cap must be tight sealed to pre- vent losing coolant, which may result in ...
Page 297: Air Cleaner Filter
Mitsubishi cover and take out the air cleaner filter. Motors dealer or a repair facility of your  Genuine Mitsubishi Motors Parts are recom- choice to have the thermostat checked, mended when replacing the air cleaner filter.
Page 298: Manual Transaxle Oil (If So Equipped)
(CVT) should be maintained and serviced by Fluid type “Removing and installing the upper cover an authorized Mitsubishi Motors dealer or a and duct” on page 9-11. repair facility of your choice to obtain the best performance and longest life. It is impor-...
Page 299: Rear Axle Oil (All-Wheel Drive Models)
N00938701330 If this occurs, have the vehicle checked by an The brake fluid and the clutch fluid share the authorized Mitsubishi Motors dealer or a reservoir tank. repair facility of your choice. 9-10 Vehicle care and maintenance...
Page 300: Battery
 Take care in handling brake fluid as it is battery and charging system tested by an harmful to the eyes, may irritates your authorized Mitsubishi Motors dealer or a skin and will damage painted surfaces. repair facility of your choice.
Page 301 Battery WARNING  Turn the ignition switch to the “LOCK” position or put the operation mode in OFF. Make sure that your clothes cannot be caught by the fan or drive belt. Personal injury could result. To remove 1. Remove the clips (A), and then remove 3.
Page 302 WARNING  Always wear protective clothing and gog- rized Mitsubishi Motors dealer or a repair gles when working with the battery, or  Never disconnect the battery while the facility of your choice before the start of cold have a skilled automobile technician do it.
Page 303: Tires
Tires  Recommended inflation pressure: the WARNING Tires inflation pressure for optimum tire perfor-  Battery posts, terminals and related acces- mance. N00939201592 sories contain lead and lead compounds.  Intended outboard sidewall: WARNING Wash hands after handling. • The sidewall that contains a whitewall, ...
Page 304 Tires  Sidewall: portion of a tire between the Construction code Tire Markings tread and bead. •“R” means radial construc-  Section width: the linear distance between tion. the exteriors of the sidewalls of an •“D” means diagonal or bias inflated tire, excluding elevations due to construction.
Page 305 Tires Speed symbol NOTE WARNING A symbol indicating the LT (Light Truck) -metric tire Overloading of your tire is   range of speeds at which a sizing is based on U.S.A. design dangerous. Overloading can tire can carry a load corre- standards.
Page 306 Tires EXAMPLE: DOT MA L9 ABCD under controlled conditions on speci- Treadwear, Traction and Temper- 1504 fied government test surfaces of ature Grades Department of Transporta- asphalt and concrete. A tire marked tion C may have poor traction perfor- Treadwear This symbol certifies that the mance.
Page 307 Tires The tire pressure for your vehicle under nor- Cold inflation pressure must not go above the Tire inflation pressures mal driving conditions is listed on the placard maximum values molded into the tire side- N00939301955 attached to the driver’s door sill. wall.
Page 308 To even out the wear on your tires and make tires that differ in size, type, brand or the them last longer, Mitsubishi Motors Corpora- degree of wear, will increase the differential tion recommends that you rotate your tires at oil temperature, resulting in possible damage to the driving system.
Page 309 75 mph (120 km/h). Tires that have arrows showing rotation direction Front CAUTION  Only Mitsubishi Motors Authorized wheels Front should be used, because your vehicle is equipped with a tire pressure monitoring sys- tem.
Page 310: Clutch Pedal Free Play (If So Equipped)
Clutch pedal free play (if so equipped) Tire chains Brake pedal free play Parking brake N00940100116 N00940301346 N00940400249 To check the brake pedal free play (A), turn CAUTION off the engine and press the brake pedal sev- Parking brake lever stroke ...
Page 311: Wiper Blades
Wiper blades and Environment Canada. The emission-con- NOTE Wiper blades trol system is made of:  To meet government regulations and pro- N00940700138 mote cleaner air, your vehicle is equipped  a positive crankcase ventilation system Check the wiper blades occasionally. Clean with an onboard diagnostic system (OBD).
Page 312: General Maintenance
Have the system checked at an authorized for: Mitsubishi Motors dealer. Mitsubishi Motors dealer at the mileage spec- ified in the “WARRANTY AND MAINTE-  Severe surface cracking, scuffing or worn Fuel system (tank, pipe line and NANCE MANUAL”.
Page 313: For Cold And Snowy Weather
For cold and snowy weather  The underside or rear of the vehicle is Also, put a light coat of the same grease on Ball joint, steering linkage seals damaged the safety catch wherever moving parts touch. and drive shaft boots Also check the exhaust system each time the N00941800077 For cold and snowy weather...
Page 314: Fusible Links
In case of a melted fusible link, see your authorized Mitsubishi Motors dealer or a repair facility of your choice for inspection 2. To put back the fuse lid, line up the fuse and replacement.
Page 315 Fuses Engine compartment Passenger compartment fuse loca- Sym- Capac- Electrical system tion table Windshield wiper 30 A In the engine compartment, the fuse block is Passenger compartment fuse location Optional 10 A located as shown in the illustration. Door locks 20 A Radio 15 A...
Page 316 Fuses Sym- Capac- Engine compartment fuse location Sym- Capac- Electrical system Electrical system table Power window con- Alternator 7.5 A 30 A* trol Engine compartment fuse location Headlight washer 20 A Defogger 30 A* Air conditioning 10 A Heated door mirror 7.5 A ETV/Oil cooler fan 15 A...
Page 317 Fuses Sym- Capac- Sym- Capac- Identification of fuse Electrical system Electrical system Headlight Audio amplifier 30 A Capacity Color (low Halogen 10 A Diesel 30 A 7.5 A Brown beam) (left) — Spare fuse 10 A 10 A Headlight 15 A Blue —...
Page 318: Replacement Of Light Bulbs
If you need to have your vehicle dis- checked by an authorized Mitsubishi Motors posed of, you should remove the high dealer or a repair facility of your choice to intensity discharge headlights before dis- 4.
Page 319 Front work as required, it is recommended that (Discharge bulb) these procedures be carried out by an autho- Front side-marker rized Mitsubishi Motors dealer or a repair light facility of your choice. WY5W Parking light (Type  Be careful not to scratch the vehicle body when removing a light and lens.
Page 320  It is not possible to repair or replace only the Item No. or bulb for the side turn signal light. bulb Check with an authorized Mitsubishi Motors type dealer or a repair facility of your choice when the light needs to be repaired or High-mounted stop —...
Page 321 Replacement of light bulbs Compartment N00950401744 *- Front of the vehicle 4. To install the bulb, perform the removal steps in reverse. 2. Turn the bulb (B) counterclockwise to Item Wattage remove it. CAUTION Dome light (rear)*  Handle halogen light bulb with care. The gas Vanity mirror lights* inside a halogen light bulb is highly pressur- ized, so dropping, knocking, or scratching a...
Page 322 Replacement of light bulbs CAUTION  Never hold the halogen light bulb with a bare hand, dirty glove, etc. The oil from your hand could cause the bulb to break the next time the headlights are used. If the glass surface is dirty, clean it with alcohol and let it dry completely before installing the bulb.
Page 323 Adjustment of headlight aim 2. Pull the bulb out of the socket. N00943200121 The alignment of the headlights should be checked by an authorized Mitsubishi Motors dealer or a repair facility of your choice. Headlights (low beam, for vehi- Front side-marker lights/park-...
Page 324 “Removing and bulb for the side turn signal light. installing the upper cover and duct” on Check with an authorized Mitsubishi Motors page 9-11. dealer or a repair facility of your choice 2. Turn the socket (A) counterclockwise to when the light needs to be repaired or remove it.
Page 325 Replacement of light bulbs 2. Insert a straight blade (or minus) screw- 5. Turn the bulb (G) counterclockwise to NOTE driver with a cloth over its tip into the remove it.  Except for vehicles equipped with daytime light cover (B) and pry gently to remove running lights, when unfastening the screws, be careful not to move the beam position adjustment screw (D).
Page 326  The daytime running light/parking lights installing the bulb. (Type 2) uses an LED instead of the bulb. Check with an authorized Mitsubishi Motors dealer or a repair facility of your choice B- Rear side-marker light, and tail and stop...
Page 327 Replacement of light bulbs 2. Insert a screwdriver into the notch of the cover and pry gently to remove the cover. 4. To install the bulb, perform the removal 5. To install the bulb, perform the removal steps in reverse. steps in reverse.
Page 328: Vehicle Care Precautions
 The high-mounted stop light uses an LED instead of the bulb. Check with an authorized Mitsubishi Motors dealer or a repair facility of your choice when the light needs to be repaired or replaced.
Page 329: Cleaning The Inside Of Your Vehicle
Cleaning the inside of your vehicle CAUTION CAUTION NOTE  Cleaning products can be dangerous. Some  Do not use organic substances (solvents,  Do not use cleaners, conditioners, and pro- are poisonous and others are highly flamma- benzine, kerosene, alcohol, gasoline, etc.) or tectants containing silicones or wax.
Page 330 Cleaning the outside of your vehicle NOTE NOTE Washing  If fuzzing is difficult to remove from the seat  The genuine leather surface may harden and N00945901682 upholstery, draw a suitable defuzzing brush shrink if it is exposed to the direct sunlight Chemicals contained in the dirt and dust over the surface in one direction.
Page 331 Cleaning the outside of your vehicle CAUTION CAUTION Waxing  Never spray or splash water on the electrical • If your vehicle is equipped with the rain N00946000234 parts in the engine compartment. This may sensor wipers, place the wiper switch lever Wax your vehicle once or twice a year, or damage them.
Page 332 Cleaning the outside of your vehicle In this case, wipe it off using lukewarm water 2. Use a mild detergent on any dirt that can- Polishing and a soft cloth or chamois. not be removed easily with water. N00946100046 Rinse off the detergent after washing the If painted surfaces have been severely dam- wheel.
Page 333 Cleaning the outside of your vehicle Wiper blades N00946700068 Use a soft cloth and glass cleaner to remove grease, dead insects, etc., from the wiper blades. Replace the wiper blades when they no longer clean the windshield and rear window prop- erly.
Page 334 Customer assistance/ Reporting Safety Defects Consumer information (For vehicles sold in U.S.A.) ....10-2 Reporting Safety Defects ...............10-2 Important facts to know in case of an accident ......10-4...
Page 335 Administration (NHTSA) in addi- ) times as well on the government course heat when tested under controlled conditions tion to notifying Mitsubishi Motors as a tire graded 100. The relative performance on a specified indoor laboratory test wheel. Corporation.
Page 336 Canada, Inc. call 1-888-576-4878 or and if it finds that a safety defect write to: To contact Mitsubishi Motors North exists in a group of vehicles, it may America, Inc. call 1-888-648-7820 or Mitsubishi Motor Sales of Can- order a recall and remedy campaign.
Page 337 Important facts to know in case of an accident call (671)649-3673 or write to:  Ask for genuine Mitsubishi Motors parts. Important facts to know in Many times, to save money, your insur- case of an accident ance company will recommend imitation Triple J Enterprises, Inc.
Page 338 Genuine Mitsubishi Motors replacements parts are your guarantee that your vehicle will have all the technological advantages and maintain the style and protec- tion of a brand new Mitsubishi Motors. Customer assistance/Reporting Safety Defects 10-5...
Page 340 Specifications Vehicle labeling ................11-2 Vehicle dimensions ................11-3 Vehicle weights ................11-3 Engine specifications ..............11-4 Battery ....................11-4 Tires and wheels ................11-5 Capacity ..................11-5...
Page 341: Vehicle Labeling
Vehicle labeling 2 - Vehicle identification num- Engine model/serial number Vehicle labeling ber plate N01147401879 The engine model and serial number are Keep a record of the chassis number and stamped on the engine cylinder block as vehicle identification number. Such informa- The vehicle identification number is stamped shown in the illustration.
Page 342: Vehicle Dimensions
Vehicle dimensions Certification label Overall width 71.3 in (1,810 mm) Overall height 64.8 in (1,645 mm) N01148200167 The certification label is located on the Wheel base 105.1 in (2,670 mm) driver’s door sill. Vehicle dimensions N01147501694 Overall length 171.9 in (4,365 mm) Vehicle weights N01147600858 Gross vehicle weight rating...
Page 343: Engine Specifications
Engine specifications Maximum roof load 176 lb (80 kg) Seating capacity 5 persons NOTE  Roof load is important because it affects the vehicle capacity weight. Refer to “Loading cargo on the roof” on page 6-11. GVWR: maximum total weight (load) limit specified for the vehicle GAWR: maximum weight (load) limit specified for the front or rear axle Seating capacity: the maximum number of occupants Engine specifications...
Page 344: Tires And Wheels
(CVT) Mitsubishi Motors Genuine NEW MULTI GEAR OIL ECO Manual transaxle 2.6 qt (2.5 L) API GL-4, SAE 75W-80 or Mitsubishi Motors Genuine NEW MULTI GEAR OIL API GL-3, SAE 75W-80 Continuously 2.0 liter models 7.3 qt (6.9 L) Refer to “Continuously variable transmission (CVT) fluid”...
Page 345 Capacity Item Capacity Lubricants Mitsubishi Motors Genuine Super Hypoid Gear Oil API GL-5 Transfer oil .53 qt (0.5 L) SAE 80 Mitsubishi Motors Genuine Super Hypoid Gear Oil API GL-5 Differential Rear axle .42 qt (0.4 L) SAE 80 Brake/Clutch (if so equipped)
Page 346 Alphabetical index Replacement ........9-38 Card holder ........5-158 Numerics Ball joint, steering linkage seals and drive Cargo area cover....... 5-171 4-wheel drive operation ....... 5-60 shaft boots ........9-24 Cargo loads ........6-10 Battery ..........9-11 Cargo room light Charging system warning light ..
Page 347 Alphabetical index Compartment........9-5 Indicators........5-135 Coolant ........9-7, 11-5 Replacement ........9-35 Hood..........9-3 Switch ......... 5-150 Daytime running lights Oil and oil filter ....... 9-5, 11-5 Bulb capacity ......... 9-30 Front seat adjustment ......4-3 Overheating........8-4 Replacement ........9-37 Front side-marker lights Serial number .........
Page 348 Alphabetical index Hazard warning lights ....... 5-135 Inspection and maintenance following rough road operation ........5-63 Head restraints........4-7 Instrument cluster....... 5-97 Malfunction indicator light ....5-136 Headlight leveling switch ....5-148 Interior lights ........5-165 Manual air conditioning......7-4 Headlights Bulb capacity .........
Page 349 Alphabetical index Parking lights (Type 1) Rearview mirror Replacement ........9-35 Bulb capacity ......... 9-30 Inside rearview mirror ..... 5-42 Snow tires .......... 9-20 Replacement ........9-34 Outside rearview mirrors ....5-44 Spark plugs ........9-22 Parking lights (Type 2) Replacement of light bulbs....
Page 350 Alphabetical index Quality grading....... 10-2 Vanity mirror lights Replacing tires and wheels....9-19 Bulb capacity ......... 9-32 Rotation ......... 9-19 Vehicle care precautions ..... 9-39 Size (tire and wheel) ....... 11-5 Vehicle dimensions ......11-3 Snow tires ........9-20 Vehicle labeling ......... 11-2 To change a tire ........
Page 353 How to calculate your gasoline mileage You can calculate your miles-per-gallon or kilometers-per-litre 3. Refill the fuel tank. Record the odometer mileage again, by using the following process: as well as the gallons/litres of fuel used. 4. Subtract the first mileage number from the second number 1.

This manual is also suitable for:

Rvr 2018

Mitsubishi MOTORS Outlander Sport 2018 Owner's Manual

General Information 3

Seat and Restraint Systems 4

Features and Controls

Driving Safety

Comfort Controls

For Emergencies

Vehicle Care and Maintenance

Quick Links

Chapters

Need help?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for Mitsubishi MOTORS Outlander Sport 2018

Summary of Contents for Mitsubishi MOTORS Outlander Sport 2018

This manual is also suitable for:

Table of Contents