Mitsubishi MOTORS Space Runner 1999 Workshop Manual Supplement page 568

Hide thumbs Also See for Space Runner 1999:

Table of Contents

Mating range

FUEL SUPPLY –

4. Check to be sure that the fuel tank packing is not damaged

or deformed, and then securely install the packing to the

If the packing is installed to the fuel pump module,

packing lip will be damaged when installing the fuel

pump module to the fuel tank and the fuel leak will

If the packing is damaged or deformed, replace the

defective packing with a new packing.

5. Apply soapy water to the inside of the packing. Align the

mating marks on the fuel tank and fuel pump module

as shown in the illustration, and then install the fuel pump

module to the fuel tank.

(1) Do not tilt the fuel pump module when installing.

(2) The packing should not be folded over as shown

6. Use the special tool to tighten the cap to the specified

Tightening torque: 49 Nm

7. Check for leaks from the installation section of the fuel

pump module by the following procedure.

(1) Apply soapy water to the circumference of the cap.

(2) Choke the vapor hose and main hose, apply an internal

FUEL GAUGE CHECK

Refer to GROUP 54 – Combination Meter.

by (A) in the illustration.

pressure of 10 kPa or less from the return hose and

check to be sure that no bubbles form in the soapy

Show Quick Links

Chapters

Table of Contents