Mitsubishi MOTORS Space Runner 1999 Workshop Manual Supplement page 181

Hide thumbs Also See for Space Runner 1999:

Table of Contents

Magnetic switch

"S" terminal

ENGINE ELECTRICAL -

DISASSEMBLY SERVICE POINTS

AA" MAGNETIC SWITCH REMOVAL

Disconnect field coil wire from "M" terminal of magnetic switch.

"B" terminal

"M" terminal

Field coil wire

AB" SNAP RING/STOP RING REMOVAL

1. Press stop ring off snap ring with a suitable socket.

2. Remove snap ring with snap ring pliers and then remove

STARTER MOTOR PARTS CLEANING

1. Do not immerse parts in cleaning solvent. Immersing the

2. Do not immerse drive unit in cleaning solvent. Overrunning

3. The drive unit may be cleaned with a brush moistened

REASSEMBLY SERVICE POINTS

"AA STOP RING/SNAP RING INSTALLATION

Using a suitable pulling tool, pull overrunning clutch stop ring

over snap ring.

Starting System

stop ring and overrunning clutch.

yoke and field coil assembly and/or armature will damage

insulation. Wipe motor assembly with a cloth only.

clutch is pre-lubricated at the factory and solvent will wash

lubrication from clutch.

with cleaning solvent and wiped dry with a cloth.

Show Quick Links

Chapters

Table of Contents