Summary of Contents for Mitsubishi MOTORS OUTLANDER PHEV
Page 1
UK specification at the time of going to press. The right is reserved to change specification, features and prices without prior notice. To avoid any misunderstandings, your Mitsubishi Motors dealer will advise of any alterations made since the date of issue of this publication. No part of this publication may be reproduced in any form or by any means, without the prior written permission of The Colt Car Company Limited.
WHAT ARE THE KEY FEATURES OF THE PLUG-IN HYBRID EV SYSTEM? SELECTOR LEVER (JOYSTICK TYPE) PADDLE The PHEV system fitted to the Outlander PHEV is one of the most advanced available today. It – (Intensity UP) + (Intensity DOWN) utilises three distinct driving modes that are automatically selected depending on the driving conditions and the battery charge level.
EV SYSTEM/SELECTOR LEVER OPERATION STARTING THE PLUG-IN HYBRID EV SYSTEM OPERATING THE SELECTOR LEVER Ensure that the charging cable is disconnected from the vehicle. To start the vehicle from a standstill, follow the steps below. Step 1 Step 2 Ensure that the handbrake is applied. Step 1 Ensure that the indicator is illuminated.
OUTLANDER Charging lid port PHEV. For details, please refer to the owner’s manual or go to the following MITSUBISHI MOTORS web site. www.mitsubishi-motors.com/en/products/outlander_phev/app/remote/index.html MITSUBISHI Remote Control is standard on GX3h+, GX4h/hs and GX5h/hs models and enables you to...
If the recommended rate of refuelling is not possible for any reason, consult your MITSUBISHI MOTORS snow. Pressing the switch again puts the vehicle back in NORMAL.
Page 7
AROUND THE STEERING WHEEL Acoustic Vehicle Alerting System (AVAS) OFF Switch Pressing the switch deactivates the acoustic vehicle alerting system. The AVAS OFF indicator comes on. Pressing the switch again reactivates the alerting system. Do not turn the system off when there is a possibility of pedestrians on the road.
MITSUBISHI REMOTE CONTROL APP Android To use the Mitsubishi Remote Control App, register your wireless device and your vehicle. REGISTRATION PROCEDURE This screen will show when registration is complete. Step 1 Setup your vehicle and wireless device so they can be registered. Step 2 Setup your vehicle and wireless device to communicate wirelessly.
Need help?
Do you have a question about the OUTLANDER PHEV and is the answer not in the manual?
Questions and answers