Thermostat <4G6-Mpi - Mitsubishi MOTORS Space Runner 1999 Workshop Manual Supplement

THERMOSTAT <4G6-MPI>
REMOVAL AND INSTALLATION
Pre-removal and Post-installation Operation
D Engine Coolant Draining and Supplying
D Air Intake Duct Removal and Installation
Removal steps
AA" "BA 1. Radiator lower hose connection
2. Control wiring harness mounting
bolt
Rubber ring
ENGINE COOLING -
REMOVAL SERVICE POINT
AA" RADIATOR LOWER HOSE DISCONNECTION
After making mating marks on the radiator hose and the hose
clamp, disconnect the radiator hose.
INSTALLATION SERVICE POINTS
Jiggle valve
"AA THERMOSTAT INSTALLATION
Install the thermostat so that the jiggle valve is facing straight
up.
Caution
Make absolutely sure that no oil is adhering to the rubber
ring of the thermostat. In addition, be careful not to fold
over or scratch the rubber ring when inserting. If the
rubber ring is damaged, replace the thermostat.
Thermostat <4G6-MPI>
3
4
3. Water inlet fitting
"AA 4. Thermostat
2
13 Nm
1
14-3